Hi everybody…....My husband finally got the floor finished…...he did a fantastic job I might add and now…..I finally sucked up enough courage to get started on my kitchen cabinets. The kitchen and dining area is 14 ft wide x 24.6 ft long. My cabinets are made of plywood and my face frames and doors are made out of hickory. I have never worked on a set of kitchen cabinets before, so I am pretty much learning this on my own. I have a friend on here that gives me advice whe...
Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...
I have been working on a project in Cherry and before I finished the desks I decided to try out some of the General Finishes Dye stain but on the scrap test pieces the blotching was driving me nuts. I came to this site and tried all the suggestions until I came across the discussion proclaiming that Charles Neil’s pre stain conditioner was the way to go. Bought some, tried it and still had minor blotching but it works well. Watching his video he said it was a water based PVA enhanced produ...
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
I want to give credit to several people who have inspired me, challenged me, and gave me visual tutorials to correct my mistakes. Mark Hillard, Bob, The Grizzman, Andy Halewood aka Andyboy, Benji Reyes,and Peter aka Woodbridge, Charles Neil, Mark S The Wood Whisperer, and Marc Adams. Mark Hillard presented me with an observation that” maybe I would rather work on my tools then build a furniture piece. First, I got angry, because he busted me out, and then we discussed building thi...
Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...
Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...
Hello again friends. Ok I know this bench build has been a little anticlimactic because you have seen the bench put together a million times. But this should be my final post on this bench build… maybe… I got the finish applied, added leather to the vices, and put a hand wheel on the wagon vise. After testing out the finish on scraps I decided to go with 1-1-1 (MS, Poly, BLO) on most of the bench. I sanded it into the top with 220 grit sandpaper to fill the pores some. J...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries