Over the past few years, I have had the chance to build my own door handles out of copper for several commissioned art-furniture pieces. This is something I enjoy doing, and it gives my work another niche to offer. I would not say that I am a coppersmith, as there is a lot that I don’t know about the process. I am almost completely self-taught, so there is bound to be a lot I haven’t learned yet. I bought two old reprinted books on the subject of coppersmithing, and I think ...
Let me start by saying that the first part of this blog although posted earlier today, was actually made about a year ago, I just posted it today as a preceding part to the one you’re reading now… tried not to double post and ‘push’ other’s from the blog front page, so I waited half a day between 2 posts, although both were made ready at the same time. to continue the story were I left off, what I found most difficult with setting up the box was the box joints...
Today I was able to resaw some 3/4” boards to make the 3/8” (slightly less) material for the drawers, cut the parts, and joinery, and put it all together for a dry fit. I had originally planned on having 9 individual drawers in the center compartment, but for lack of materials and time, I ended up making 3 large drawers and I’ll put dividers in those and see how it goes, for ease of use it might be better to make 3 smaller boxes for each drawer so that each one can be tak...
There’s a show on Discovery called “TimeWarp” which uses super high speed cameras to slow down all matter of phenomena to show what’s going on in the physical world at micro timescales. They had a call for entries after one episode and it got me to thinking that I’d love to see various woodworking things slowed down. Apparently they had the same idea last year, but I missed it. They put the SAWSTOP under the cameras, and the inventor even tried it on his own fing...
I decided I was going to get some free wood from a local retail store that had left over pallets laying around. After getting permission, I borrowed a pick-up truck and got a load of pallets home. Trial and error taught me you can not just hammer them apart and expect to have any usable wood. I finally used a handheld circular saw and carefully missed the nails as I disassembled the pallets. I managed to get four small pieces that looked like they could make a box. I cleaned up the edges o...
Ok – so now I’m on to making the box itself. I’ve not accomplished much today as I’m expecting company and spent a lot of shop time cleaning and preparing a meal. But the slow process is ok I’m really seeing things a little differently being forced to go slowly. It’s also a test of my patience trying to take pictures of the process along the way. For every pic you see here – I’ve probably taken 30 or 40 to get it right. I spoke to Santa last ni...
I’ve been sort of stuck with this project once it was time to get to the drawers mostly because for lack of material. I wanted to keep all the drawers made of same material and not pick and choose from what I could find at hand, and the only material that I have at ~1/2” thickness range that would make a good fit is some QS oak boards mostly 3 1/2 foot long: I ran calculations and found that If I went with my desired drawer depth of 14” I will not have enough material...
I actually completed this on Father’s Day and got it in the mail this past Tuesday. After the glue up, I had to plane the fingers that were proud as well as lay down a finish. I cleaned up the joints with a low-angle block plane one evening and then oiled it with two coats of Watco Danish Oil (Natural) on Sunday and Monday. Dad received it last evening. He had just walked in the door when I called so I got to listen while he opened it. That was pretty cool to hear his reaction. He did...
Hello everyone. It’s been forever since I posted anything it seems. I’ve been pretty busy with home upgrades and stuff for work but I finally got into the shop this weekend for a serious amount of time. I purchased wood for the base of the bench I’ll will be blogging about soon. I’m letting the lumber acclimate to the shop before milling it. So, since I had to let the wood do its thing on the stickers I decided I was going to challenge myself to build a box of some ...
ok – I’ve built my router table jig and have the materials milled and ready to go. Now I see the problem with my jig. I can’t see what I’m doing from behind. These pictures will tell the story. (And no I’m not stick thin but you can’t take a picture of yourself. My eyes really are better looking than this—- but this is eye level This shows the line of sight. The jig is up next to the router bit – as you can see – I CAN’T see wh...
- My Journey As A Scroll Saw Pattern Designer - 1616 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1641 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 224 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- robscastle - 183 entries
- Chris Davis - 183 entries