LumberJocks

Woodworking blog entries tagged with 'fillister'

  • Advertise with us
View Wally331's profile

Building a Moving Fillister Plane #2: Boxing, Depth Stop, Fence and even a nicker

27 days ago by Wally331 | 5 comments »

Pics will be in a few minutes… Where exactly did I leave off last time…ahh the main body is essentially done, and now all the adjustment features are all that’s left. Boxing The one weakness of cherry for planes is that it’s just a little bit soft. Not much softer then beech, but enough that a harder sole will help over the years. Especially on a fillister or rabbet plane where almost all of the wear is on a corner. I chose bubinga to box it with, because its ...

Read this entry »


View Wally331's profile

Building a Moving Fillister Plane #1: Precursor and laminating the body

30 days ago by Wally331 | 4 comments »

Intro- I’ve been using a lot of wooden planes recently and have really come to enjoy their lightness and the feel of wood sliding on wood. Obviously there are a ton of vintage woodies out there; however, I quite enjoy making my own versions of them. They are a lot cheaper (if you have some time on your hands) and you don’t have to deal with old warped wood and a host of other problems you may encounter. I can’t say I am an expert by any means, I’m simply sharing my...

Read this entry »


View Don W's profile (online now)

Just some planes restored #6: Wood Bodied Fillister restored.

835 days ago by Don W | 9 comments »

Before More photo's and info

Read this entry »


View Scott R. Turner's profile

Moving Fillister Plane

932 days ago by Scott R. Turner | 2 comments »

I’ve been in the market for a rabbet plane of some sort, and tried to buy a Stanley #78 from Patrick Leach earlier this month. I was too late to get the Stanley but Patrick sent me a moving fillister plane instead. It was made by “prolific plane maker” John Bell of Philadelphia circa 1845: It’s a beautiful piece of work, and tempts me to become a hand plane collector, but I really intended it to be a working plane. But it certainly wasn’t in working condit...

Read this entry »


View HungryTermite's profile

New Yankee Blanket Chest #5: Measure Twice, Hand Plane Once!

1581 days ago by HungryTermite | 2 comments »

Today was a fun day with several new lessons learned. I finally got through the crunch of midterms at school and craziness at work to have a day where I could make some sawdust. The next step on the blanket chest was to clean up some of the joints a little bit and then cut the wood for the panels. Well, over the last couple months we have had a lot of rain and the garage has flooded a bit. I dug out the 1×12s that I bought to make the panels and they were all cupped and twisted to th...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase