LumberJocks

Woodworking blog entries tagged with 'fiddle'

  • Advertise with us
View Dave Rutan's profile

Violin Kit #5: Creating the saddle

04-14-2018 12:43 AM by Dave Rutan | 0 comments »

The only part of this violin kit that was not included, not mentioned in the auction description, not in the photos, etc., was the saddle on which the tailpiece anchor rides. I decided to make one from a piece of cherry that I got when a tree was taken down at our church.

Read this entry »


View Dave Rutan's profile

Violin Kit #4: Attaching the Neck

04-11-2018 08:44 PM by Dave Rutan | 3 comments »

First thing is to cut down the back button closer to the shape it needs to be. This will be trimmed after the neck is glued on. Glue is applied to both pieces and the neck is clamped into position. Not much pressure is needed for this. Where the neck joins the body, the gap is supposed to measure 6mm (or whatever the Imperial equivalent is). At the end of the fingerboard, the top of the fingerboard ‘should’ measure about 7/8 of an inch. Mine is a little bit hi...

Read this entry »


View Dave Rutan's profile

Violin Kit #3: Fitting the Neck

04-11-2018 08:22 PM by Dave Rutan | 2 comments »

The main part of this violin kit is fitting the neck to the body of the instrument. To do this a mortise must be created in the neck end of the instrument (the one opposite the end button end) that not only fits the neck root as tightly as possible, but also holds it at the proper angle and height. You start by cutting the overhand off the top plate, holding the neck in place for straightness and marking where it should go. Then you cut within your lines to a depth of about a quarter...

Read this entry »


View Dave Rutan's profile

Violin Kit #2: Small step, end button installation

04-10-2018 12:24 AM by Dave Rutan | 4 comments »

I decided to start by simply drilling and reaming the hole for the end button of the fiddle and fitting it in place. jj Next up, the hard part, fitting the neck.

Read this entry »


View Wes Grimes's profile

Fiddle Case #1: I am tired of being out "blinged" at the fiddle jams

04-19-2012 04:11 PM by Wes Grimes | 11 comments »

Among my hobbies is playing fiddle at acoustic jams. What I have noticed when a bunch of fiddlers gather is that everyone “ohhs” and “ahhs” over the cases. I think this is because all of the fiddles look the same. Sure some have a prettier finish or grain than others, but none really jump out at you. There is always someone with a crocodile vintage case that wins the show. Those are hard to come by, so I thought I would try building a wooden case to try and keep ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com