About a year ago I moved onto 5 acres full of nice size fir and cedar trees a lot of trees. We cut down about a half acre for garden and chicken space. From the trees we cut down we got 5000 board feet of one inch and two inch fir timbers (mostly 10inch wide by 10 to 20ft long) and a tonne of one inch cedar planking (averaging about 14inches wide). That’s a lot of wood for one lowly carpenter but I think I will manage. Well first things first. Dig a garden and get the chickens out of...
Over the past week I’ve been building a much needed kitchen table. It is a country style table based off of Ana White’s plan. I have made a few modifications to it to suit my own personal preferences (and my wife’s). So far I have the full construction complete except for plugging any screw holes. Here is the most recent picture.You can catch up on the build by clicking these links.The PlansDay 1Day 2
Check out my guest post on my wife's blog where I discuss how to build two headboards from a pair of reclaimed doors. There are even detailed instructions with measurements available for download.
Here are a few pics of the maple and alder collecting I did last fall and late summer out at the tree farm. A few whacks with the maul on a couple of wedges turns this into these ;-)) This double grab hook comes in real handy Easy to open when it gets bound up too tight :-)) Handy for lifting logs too The Tree Farm is on the far end of the low hill in the foreground. It is just about dead center in the picture where the darkest green gets a bit lighter for the next hill...
So like many here, this summer has been one of hardship, and little work, and lots of stress. But as outlined earlier, that’s why this blog is titled the way it is. This spring didn’t see as many trees fall as I figured would, so not as much work there. One old box elder did take a plunge…right into the fork of a large mulberry tree, splitting it about 10 ft….but still 10ft off the ground….and over a fence right into the neighbor’s garden…so that w...
This is a woodworking website, so I’ll try to limit this blog series to mostly wood related entries. Many people have expressed their desire to move to a farm. Well, we have that opportunity, and we are grabbing it with all hands. Just a little introductory background: A couple of years ago, I was going nuts because the project I was on had been on hold for several months, and got delayed for another 12 months, so I resigned. I decided (with my wife’s approval) to work out...
So today I managed to pick upWhat’s this? It’s plate glass!I got it home, and a little later, after picking up some 3M-77 spray adhesive and some more sandpaper,I then got to work lapping my beat up blue marples chisel. As it turns out, the chisel has gotten WAY out of wack. Probably from my misguided attempts at lapping it in the past, but oh well, that’s why I had gotten them cheap, so I could learn without destroying something special.The pictures of the lapping and honin...
- My Journey As A Scroll Saw Pattern Designer - 1597 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1622 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 218 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries