This little saw was the absolute sweetest, and I thought I’d lost all the pictures, but here they are! This was a restoration I will treasure forever, and I figure if I post it here I can’t lose it again. A tilting-table saw by Inca, highly sought-after and treasured by model makers especially. Swiss-made with their penchant for good engineering. I found it at a huge annual rummage sale (fund-raiser)—had to get up at 6 a.m. to be in line and then run like crazy. Restora...
Those shifty hard to find 1/2”-12(nc) 1 1/2” x 4 head bolts came in today, so proceeded to assemble the jointer.Here are the brackets that required those 4 bolts: Assembled the hand wheel crank mechanisms and installed the beds and fence. Here is a side by side of my 6” with 17” tables and my 8” with 32” tables: The 4 knives are out being sharpened by local saw shop, should be ready Tuesday.I also have to read up about the table “gibs” ...
A lot of folks use electrolysis for rust removal, which works great and if you are going to do a lot of rust removal, I recommend it. I don’t do a lot of it, and find Evapo-Rust works spectacularly to clean up even pitted parts. The product is reusable, so a gallon jug lasts quite a while. I have some different sized plastic containers depending on the size of parts, and completely submerge the parts. I cover the container to limit evaporation (Saran Wrap works great if you don’t have a lid)....
Hey Folks, I’ve been pretty busy working on the shop lately, between plane restoration and a few past due projects that I had, I didn’t have time to make a new blog entry until now. Last week I got a lot with 10 bench planes out eBay, for a pretty good price. Out of those 10 planes there were 2 No’s 7 and 1 No 8. I couldn’t believe it, mi first No 8, and it was on a very sad condition. It is a No 8 Type 9 1902-1907, yes this baby is somewhere between 103 and 108 ...
Hello, my name is TD and I’m a planeaholic. There I said it, they say that admitting you have a problem is the biggest step. Whew! Now I can get to the good stuff. Lets take a look at where it all began I was walking through a local junk store just minding my own business when my eyes were drawn to a collection of rusty metal items assembled in what looked to be the shape of a plane (I had seen planes before here on Lumberjocks but had never encountered one in the wild). I had ...
I came back from work today, after a very long break of 17 days, it was a really hard day since I had it to get use to wake up early deal with the traffic, the boss etc, I was literally dragging all day long, and to my surprise I found that the second No 6 I got on ebay was already waiting for me to start the restoration. Let’s take a look what I got. I think I’m having some kind of attraction for highly abused and damaged planes, I really love to see the restoration process being...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries