Until recently my lathe experience has been 50 or so pen/pencils, a few miniature goblets, and a couple small 5 inch bowls over the past few years on a Jet mini lathe, enough to want to try other lathe work. This past fall I was fortunate to have the opportunity to acquire a PM 3520B, but due to other work and priorities I’ve not had a lot of time to use it yet…and that’s “killing me”. So this blog documents what I consider my first significant lathe project. Recently a partially segmen...
In part 1 I found a Eucalyptus tree in a nearby neighborhood. In part 2 I cut it up and had a better look under the bark, finding great boring bug patterns. In part 3, I finally took a 3” diameter piece of the green wood and had a go at it on my Sherline 4400 CNC mini lathe, set up as a manual wood lathe. I’m quite ‘green’ myself at this turning business, and don’t yet have many techniques, experience, and tools necessary, but it came out alright, was a lot of...
In part 1, I found a Euc in an LA neighborhood, went back under cover of ninja darkness around midnight, spent 3 hours cutting it up and hauling it home in 2 trips, and detailed what I ended up with. In this part, I cut up some of the bigger logs, look under the bark a bit more, and brush away boring bug excrement to reveal some more beautiful patterning underneath. The trails seen here are caused by Eucalyptus Longhorned Borer larvae, several of which I found while digging under the bark,...
While looking through old Flickr sets, I realized I never made public one in which I slabbed one of the huge Eucalyptus logs I wrestled home from a craigslist ad. The largest of them is over 230lbs. I chose the smallest – probably around 80-100lbs, because I was desperate to see what lurked inside. I have at least a dozen of these things, so I could sacrifice one enormous beast to curiosity, though that said, I did immediately seal up the ends with a few inches worth of Anchorseal, and ...
I went out for a walk from work late in the day last week sometime, through a neighborhood I’d not explored. At its end, I encountered a fallen gum tree, and as probably seems the right response to many in here, was overcome with joy. It had obviously been down for a while. These LA people sure don’t understand what treasure there is to be had in their trash. I determined to come back for it at night… sometime. Uncharacteristically for timid ol’ me, I went back...
Processes involved making the base of a dressing table. Tons of little hints and tips.
On my first few drives to my new job way up in North Hollywood I passed by a large, grassy park loaded up with – by my standards – enormous trees. I vowed to check them out, and on Wednesday of last week, I took a lunchtime walk down there. It’s only a few blocks, though they are large, city blocks. It’s probably not a full 10-minute walk, so it’s not bad. Looking it up later, I learned that it’s North Hollywood Park. The Days of Our Lives cast did a ...
This is my first table. Amazed to see coffee table’s prices today, I decided to build one.I’m inspired by retro tables like Kindney table, Danish design and Nakashima’s artwork. This is a Tasmanian Eucalyptus Burl slab.I want to create a coffee table like this one :http://www.surfingcowboys.com/woslcowihale.html I find the hairpin legs :http://www.ianmaclean.com/ Now I will sanding with avrasive paper 50, 80, 120, 180 and 240. Pictures coming so...
Previously:Wood IDs #6: Found Eucalyptus tree in LA - part 1 of 3Wood IDs #7: Found Eucalyptus tree in LA - part 2 of 3Wood IDs #8: Found Eucalyptus tree in LA - part 3 of 3 It’s a bit labor intensive getting all the bark and Eucalyptus Longhorned Borer bug excretion cleaned off the Eucalyptus tree I cut up into logs from a nearby neighborhood. It dawned on me a couple weeks ago that I could use a wire wheel brush in my drill press. I’ve used the technique to brush up aluminum ...
Here are some pics of the haul! This one shows a ton of Eucalyptus Longhorn Borer activity, just like the much tinier tree I found awhile ago: with raked lighting here: This log has something like quilting on two faces: Unfortunate checking going on here. I’ll have to see how deep it goes, and if it’s all the way through, I’ll have to learn a little something about filling and stabilizing. It would be a shame to have to turn all of these into ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1781 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 106 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Woodworking on a Half-Shoestring - 77 parts
- Sheila Landry (scrollgirl) - 1806 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 235 entries
- Dave Rutan - 228 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 204 entries
- Smitty_Cabinetshop - 195 entries