Woodworking blog entries tagged with 'epoxy'

  • Advertise with us
View Ancientwood's profile

Structural Crack Filling

08-24-2009 11:35 PM by Ancientwood | 4 comments »

Ancientwood has developed a technique for filling large, structural cracks, sometimes found in Ancient Kauri slabs. This is a step-by-step approach for creating a flat surface with beautiful patterns and design. 1. The slab must first be flattened. This can be done with a drum sander, planer or a CNC router.2. After the slab is flat, locate cracks that need filling.3. Fill any hairline cracks with color-matched latex putty. Wet the adjacent area of the Ancient Kauri with spirits to get an a...

Read this entry »

View Jason Fisher's profile

Epoxying the Garage #1: Day 1 - DeJunking

04-15-2009 08:41 AM by Jason Fisher | 7 comments »

Friday, 04.11.2008… I’ve been attempting for a while to get started in transforming my half of our small 2-car garage into a usable workshop. The last several months have been filled with snow out here in Utah and my desire to spend any amount of time in the garage with the door open has been quite minimal. But with Spring arriving, the weather was calling me to find a project. As luck would have it, my good friend called last week to tell me he had just epoxied his garage flo...

Read this entry »

View Heyz's profile

DN Ice Boat #1: Not really the beginning....

10-10-2008 08:42 AM by Heyz | 0 comments »

First of all, thanks to Trifern and Max for beating me to posting anything. They’ve given me welcome comments before I could do anything! Been reading this site daily for a couple of months now inspiring myself to build again…. So I’ll start with a work in progress. A couple of friends and myself decided to build our own DN ice boats sometime last year. I’ve already got one that I purchased a couple of years ago, but that’s only have the fun! So we got toge...

Read this entry »

View teenagewoodworker's profile

Shop Updates #6: Router Table - Finished!

07-03-2008 12:21 AM by teenagewoodworker | 13 comments »

so my router table project has come to an end. i got my shipment from Lee Valley today and i am happy to say that everything is completed. first upon getting the 2’ T-track i cut it in half with a jigsaw and a metal cutting blade. then i epoxied the track into place. i used a board of mdf to distribute pressure and my two former table saw wings which are probably around 20 pounds each on top. then i just drilled for and installed the t bolts and put on the knobs. and when the fen...

Read this entry »

View bryce's profile

Wood Tub Project #1: Glue Up

10-13-2007 08:45 PM by bryce | 5 comments »

Thanks Everyone for the warm welcome everyone! I just a young guy that is a beginning woodworker. So if anyone has any tips and suggestions let me know!! The project that I am working on now is a wooden tub. I am using 8/4 red oak and building what is essentially big square box. Right now I am glueing up the wood together to make all the sides. Now I know what your thinking. Wood and water don’t mix. In the past when people have built wooden tubs it was left completely fi...

Read this entry »

View Bob Babcock's profile

Standup Paddleboard Paddles #5: Time for the water.

08-25-2007 01:43 AM by Bob Babcock | 10 comments »

We should be paddling these next weekend at Lime Rock . My brother is going to be racing over the weekend in his Peyote MKII in the Rolex Vintage Festival. It should be a great time. Here are the finished paddles….actually I still need to varnish them but they shouldn’t change much. The one on the right is the 2nd one. Much lighter than the 1st and likely to be the one my brother chooses. Blade fronts…I really like #2…I hope it performs well with the rolled edge....

Read this entry »

View Bob Babcock's profile

Standup Paddleboard Paddles #4: All done but the finish.

08-20-2007 03:10 AM by Bob Babcock | 6 comments »

I completed the other paddle this weekend. Both are all done exept for the finishing. I’ve decided against doing any fiberglassing. I’m planning on using the West Systems epoxy with the 207 hardener and then 3 coats of Epifanes varnish. I’m going to wait for the warmer drier weather later in the week. I’ve noticed big differences in the epoxy finish depending on the weather. I didn’t take as many pictures of the process on this one…basically the same as ...

Read this entry »

View Bob Babcock's profile

Standup Paddleboard Paddles #3: Finishing #1 - Starting #2

08-13-2007 04:19 AM by Bob Babcock | 6 comments »

I started #2 today. This one I’m shooting for better performance. I’m only using five 1/4” laminations this time instead of six and only one is mahogany instead of two. No lyptus in the handle this time either. The difference in weight is very noticable already. Carving out the shark for the inlay Dry fit. The splines for the blade. I book matched the front and rear blade faces. The front is going to be cedar, the rear mahogany. The light cedar front will have a ...

Read this entry »

« prev 1 ... 5 6 7 8
78 entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics