LumberJocks

Woodworking blog entries tagged with 'ends'

  • Advertise with us
View CaptainSkully's profile

Arts & Crafts Dining Room Set #17: Table Top Post Mortem

04-21-2010 05:25 PM by CaptainSkully | 5 comments »

We’ve been using the new top on top of our old table until I can finish the base. Over the last few months, the top has warped a bit, and was obviously out of alignment with the breadboard ends. While watching an old New Yankee Workshop online, I realized one of the things I did to cause this. I selected the boards for their aesthetic value, trying to match the grain to make it look like one solid piece of wood 38” wide. I neglected to alternate the boards’ growth rings,...

Read this entry »


View CaptainSkully's profile

Darrell Peart's Aurora Sofa Table #5: Breadboard Ends

09-08-2009 09:34 PM by CaptainSkully | 3 comments »

While I’m ammonia fuming another project, I figured I’d make progress on this one. I pulled a WoodWhisperer and threw away the tape measure. I milled the ends to the proper thickness (which also gave me some nice mahogany veneer). I can’t tell you how lovely working mahogany is, compared to oak. Then while the stock was still one long piece, I used the table saw blade to make the dado that fits the tongue on the top (Darrell calls it the “core”). I achieved ...

Read this entry »


View CaptainSkully's profile

Darrell Peart's Aurora Sofa Table #4: Table Top

09-08-2009 03:38 AM by CaptainSkully | 3 comments »

As I was waiting for another project to dry, I did a little work on the table top. I had cut it oversized on purpose to take advantage of the wavy figure in the board. I then had to face the difficult decision of how to trim it down for a sofa/foyer table that didn’t stick too far out. I settled on a 14” wide board, which leaves plenty of room for a decent overhand in the front, 2 1/4” legs, and a side apron that doesn’t look like a chubby baby’s leg. I the...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com