LumberJocks

Woodworking blog entries tagged with 'end grain cutting board'

  • Advertise with us
View Chris's profile

Cutting Board / Knife Block #1: First Post and a Quick Recap

842 days ago by Chris | 4 comments »

Well I finally got around to setting up an account on Lumber Jocks and figured I’d kick things off with a quick note about my current project. First, a little bit of a back story… A good buddy of mine moved out to LA a few months back and quickly found that abundant counter space comes at a premium. Being that I’m such a nice guy (and never sent a housewarming present…) I figured I’d try to throw something together for him. What I came up with was a combinati...

Read this entry »


View jadams's profile

Inversions cutting board tutorial

1077 days ago by jadams | 11 comments »

In response to some questions about how this pattern is made… I’m not sure if this is the only method, but here’s how I did it. Here’s the original project I posted: http://lumberjocks.com/projects/53452 Hint: When you look at the board, long ways going left to right, every row is a different size, but every group of 2 rows are all the same size! Solution: First you rip strips like you would for a regular end grain board, but in a progression of widths from l...

Read this entry »


View degoose's profile (online now)

End Grain Cutting Board LJ Class 006 #4: Lesson #1

1195 days ago by degoose | 16 comments »

I know that this has been long awaited.. and I hope that the delay has not caused some to drop out of the class… NO.. I am sure that is not the case… one things that woodworkers have…is patience… Miss Debbie wrote in the latest copy of Lumberjocks e-Mag… “Patience is a virtue” they say, and a woodworker often has to use patience while working on a project. I’m picturing the time spent sanding an item, taking the sandpaper to finer and fine...

Read this entry »


View spunwood's profile

Quick Progress, Big Setback, Moving Foward...after a break

1330 days ago by spunwood | 5 comments »

Clamping a cutting board row by row. Two blocks align it along with a vertical clamp. A deadblow mallet levels it. Stephanie came up with this method. I put packing tape on the alignment blocks and on the board they are sitting on to keep them from sticking. Clamping the rows together. After the disaster, back home, having discovered what can be saved. You can see some of the planer gouges. I have been working on an end grain cutting board. I hope to join the ranks soon of the cu...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase