(Disclaimer: I take no responsibility for anything done with this information, proceed at your own risk.) I like to etch my logo onto plane blades using toner transfer and salt water electrolysis. This technique is commonly used by knife makers to put a makers mark on their blades, and is pretty simple to do. I start by making a logo in a program called Inkscape. This makes a “vector” image that can be scaled to whatever size I want without becoming blurry. I then invert ...
This article first appeared on my website, Lockwatcher's Lair – I am duplicating it here to share my experience using this system with my fellow Lumberjocks. While not specificly “woodworking” this system can speed up the process of reconditioning old tools without destroying them. The Rust Bucket Let me first thank my good friend Dave, of Pearce Woodworking for this great idea. Dave had some used hand tools he needed to clean up and had located this method th...
Hi folks! Just a note on the progress of the electrolysis system that I’ve built in order to restore a few of my grandfather’s old tools. I don’t have any pictures to post just yet, but this has been a pretty amazing process. I can’t compare it to any other process, but it has been very interesting to watch the reaction as it does its magic. It seemed to be the least damaging and toxic/caustic way to go about bringing these tools back into usable condition. In parti...
Stanley Bench Plane Restoration UPDATE PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET I have been a bit frustrated, as I can’t use my shop until the outside portion of our house reconstruction is complete which should be very soon. I have been using the down time to restore my Stanley bench plane. As soon as I get back in the shop, I have plans to make a video tool review so I am quite anxious to get going! My Stanley Bench Plane restoration project is near completion. As a remi...
Stanley Bench Plane Restoration UPDATE PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET My Stanley Bench Plane restoration project is progressing well. All parts have been cleaned of rust using the electrolytic rust removal process described in the prior blog entry. I was really impressed with how clean the parts were after the electrolytic de-rusting process. As a reminder, this is NOT a plane with intrinsic collector value. I am restoring this “user plane” to be used on my bench...
STANLEY BENCH PLANE RESTORATION Click here for large format version PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET More information available on my woodworking blog & podcast The Folding Rule Show Step #1 – Cleaning & Rust Removal I have been inspired by a number of resources to start using my hand planes and start on the slippery slope of a hand plane collection. Not the least of whom has been Wayne, our own Lumberjocks plane guru. Of course I have also explored...
Stanley Block Plane Restoration PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET A couple of days ago I spent some time rehabbing an old block plane that used to sit on the bottom of my steel carpenters box or in my nail bags depending on what I was working on at the time. I was motivated and inspired by fellow LumerJocks Wayne and Matt to pull this plane out and put it to use in the shop. I do not have photos before starting my rehab – maybe a Freudian slip as I would be embarasse...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries