LumberJocks

Woodworking blog entries tagged with 'ecabinets'

  • Advertise with us
View ScottM1's profile

Add data to eCabinets Batch using Excel Spreadsheets Part4

11-09-2017 01:49 PM by ScottM1 | 0 comments »

Here is video number4 on how to create an excel workbook to Add data to eCabinets Batch Using excel spreadsheets Click the link below to check it outView on YouTube In this video, You will learn how to make a dynamic named range as well as static named ranges.Then I will show you how to create the data validation dropdown list that will allow you to select the Item name, directory, and type. If you have not watched Parts 1,2 or 3 you can check them out here To get all of my latest tip...

Read this entry »


View ScottM1's profile

Some cool tips for adding lighting effects to your custom layouts

03-28-2015 11:59 PM by ScottM1 | 0 comments »

Hello every one this is my latest video where I show you some tips that I have learned on how to use lighting effects in custom layout.Be sure to check it out and let me know what you thinkhttps://youtu.be/Tj59OumOElAThanks. Scott Marshburn.

Read this entry »


View ScottM1's profile

Octagon Column Base Molding

02-24-2015 06:56 PM by ScottM1 | 0 comments »

This is my latest video for the octagon column seriesOctagon Column Part 5. Drawing a cutter for the base moldingIn this video I will show you how you can make a cutter that is the same profile of a base molding that is in eCabinets moldings library.Here is the link. Check it out and let me know what you think.http://youtu.be/-629T8JSCZM

Read this entry »


View ScottM1's profile

Octagon Column

02-14-2015 06:12 PM by ScottM1 | 0 comments »

Hello everyone. I have been away from ecabinets for a while but have been able to get back to work on the octagon column series here is part 4. In this video I will show you a simple way to make the base molding for this column. Check it out and give me a thumbs up if you like it. http://youtu.be/rYH8-RBLE8Q

Read this entry »


View ScottM1's profile

How to make a dynamic octagon column Parts 1 thru 3

12-27-2014 01:45 PM by ScottM1 | 0 comments »

Hello everyone.I have a new playlist that I am starting. “How to make a dynamic octagon column” all you have to do is enter the size you want and it will automatically adjust. I just finished the first three videos so check them out and let me know what you think. Here is a link to the playlist. https://www.youtube.com/playlist?list=PLsajY4bbxhrCtEhrdo0GhT7BsHTg89jZx I am already working on one that shows how you can add base molding. So be sure to keep checking in.Thanks Scott.

Read this entry »


View ScottM1's profile

Making a raised panel trunk in eCabinets #4: Creating a photo-realistic presentation of the trunk

11-29-2014 02:07 PM by ScottM1 | 0 comments »

Hello everyone. Here is my latest video. It demonstrates how I created a photo-realistic rendering of a raised panel trunk that I drew in eCabinets.Here is the link. Check it out and let me know what you think.http://youtu.be/4vqw_jMZ5eM

Read this entry »


View ScottM1's profile

How to make your doors equal widths on a frameless cabinet in eCabinets

11-16-2014 01:29 AM by ScottM1 | 0 comments »

Have you ever drawn frameless cabinets in eCabinets that have more than 2 doors and/or openings? If you have then you have probably came across this scenario. A fellow eCabinets member asked a question on the eCabinets forum. He was trying to draw a cabinet with 3 doors and no matter what he set the reveals and or gaps to he could not get them to come out the same widths, there was always 1 door that was off. Well I have a solution. I made a simple calculator in excel that will calculate ...

Read this entry »


View ScottM1's profile

How to customize pulls from eCabinets Hardware pulls Library

11-08-2014 04:36 PM by ScottM1 | 0 comments »

Hello everyone Here is a quick tip on how you can modify the pulls in the Hardware pulls library that eCabinets has available. Today I came across a situation where I need a pull for some lid supports on a secretary stile desk that I am drawing. The pull that I need is ½ inches in diameter. The pulls that eCabinets has in the hardware pulls library were too large for my application. I would like to show you how you can change the sizes and save them so that they can be applied to your d...

Read this entry »


View ScottM1's profile

Exporting Shetchup Models into eCabinets.

10-26-2014 04:46 PM by ScottM1 | 0 comments »

Hello everyone. Today I would like to share with you my latest video. This tutorial will demonstrate how to prepare a model that was drawn in Sketchup and convert it to a STL file. I will also demonstrate how to load it into the display part editor in eCabinets and apply the textures to the different components. Here is the link Check it out and let me know what you think http://youtu.be/zURS2HMtkmE Here are some videos that you might want to check out that will help you speed up plac...

Read this entry »


View ScottM1's profile

Making a raised panel trunk in eCabinets #3: Creating the profile cutters and checking out how this thing resizes.

10-22-2014 09:47 PM by ScottM1 | 0 comments »

Hello everyone. Here is the second video on how to draw a raised panel trunk in ecabinets. In this video I will show you how to name the stretchers to aide in organizing the parts plus I will show you how to use the shape manager to draw the cutters for the raised panels as well as the rails and stiles and the moldings. We will also be resizing the trunk to make sure that everything works properly. Then we will apply these cutters to the parts so check it out and let me know what you think.ht...

Read this entry »


1 2 next »
14 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com