I got a lathe in June 2015. It’s a Rikon mini lathe. For more on it, watch this video. Anyway, It sat unused until October 2015 when I was finally able to purchase some tools. To learn how to turn, I am starting with pens. I got everything I needed to make pens and have made 2 on this lathe. The first two pens I made were at a friend’s shop. He invited me to check out his shop and showed me how to turn pens. I knew then that I needed a lathe because it was just fun to turn out ...
I went to Woodcraft for the first time ever in order to get some tools so that I can start doing some turning on my new lathe. Couldn’t have picked a better day to go. The entire store was 15% off. Also, when I walked in I saw a group of people standing around a workbench near the entrance. I recognized the dude they were all talking to and realized that it was Rob Cosman, the great hand-tool woodworker from Canada. He’s on YouTube as well. Check him out. Watch the video her...
I found in my testing that I need to offset the EWT Finisher from the blank about 1/16 inch. I made a new ‘follower’ using a 1/2 inch washer. This washer offset the cutter all the way around. Using the EWT Detailer that is set to cut equal to the pattern, I make the final pass on the finial. Here are some images of the testing on a finial project. Check out my blog on a great finishing helper using a DVD container. I also have a project with a step by step ...
Developed the method of attaching the template to the base. Simple 1/4” dowels in holes in base and template. Using the tools on stands, I turned the finials. I did use my other lathe to rough out the blanks to round, cut a tenon for the chuck, rough in the square shoulders using a parting tool, and rough out some of the waste with a roughing gouge. I did use the tailstock for safety when turning using the duplicator. I sanded the finials to 220 grit and trimmed off the to...
As they say, ‘Necessity is the Mother of Invention’ and you, the woodworker, knows that fact the best. I have a little job where I am going to make 4 finials for a mahogany antique bed. I tried to buy some pre-made finials online but I couldn’t find any that matched the size and the style. Besides, the finials I found were maple and I just don’t want to try to match the finish already in the hole of trying to make maple look like mahogany. I have a set of Easy Wo...
The control box is done and mounted. I found a few things out the hard way. One was you don’t ground the motor controller. Man, the flash and the smoke! Well, that was a motor controller down the drain. Luckily, I had a spare. Upon a little research, DON’T GROUND THE MOTOR CONTROLLER’S HEAT SINK. The box I bought was aluminum, so I had to isolate the motor controller from the box. Nylon screws, washers and bolts was the solution to the grounding issue. I did ground the alumi...
I am a huge fan of the Easy Wood Tool series and have really enjoyed using my full size Ci1 Rougher and Ci0 Finisher on spindle and faceplate projects. I guess the only real gripe is that the EWT cutter heads (while you never need to sharpen them) cost just under $20 each. So, I did some measuring with the calipers and some good old Google legwork and found that Byrd Tool makes a cutter head that is near identical to the EWT version at a fraction of the cost ($2.80 each). I’m sure...
- My Journey As A Scroll Saw Pattern Designer - 1660 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1685 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 226 entries
- Stevinmarin - 212 entries
- stefang - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 201 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries