To all who have asked about the red & black quilted maple on my Pagoda Jewelry box.I think that in this case ignorance is bliss. After I worked out a recipe that I liked I read on other sites that I had done it all wrong! Oh well, I like the results.Here is my formula:½ bottle ( yep, half a bottle) of TransTint black in ¾ cup of distilled water.Saturate a rag and wipe onto the piece until you get a uniform deep black color.Let dry until no longer cool to the touch.Sand with 180 then 220 t...
For my workbench i needed a tall stool for more accurate work and just a place to rest. This is a descripition on how i made this project. Searching LJ i found these two fine projects:- Having a fascination with all-things-Japanense (having both worked in a sushi restaurant and done karate for several years) these Singer-songrwriters chairs by Junji impressed me.- This post on shop stools by shipwright described a interesting method for dying oak black with steel wool dissolved in wineg...
A deep red mahogany finish doesn’t have to be the result of a complicated process. I’ll show you how I use a simple two-step method to revitalize my mother in law’s old beat up rocking char. First, a coat of General Finishes Merlot Water-Based Dye. Second, a coat of General Finishes Brown Mahogany Gel Stain. Its all finished off with a nice satin lacquer topcoat. Topics Covered: Application tips for water-based dyes Application tips for gel stains The co...
Today I’ll be staining some maple. The customer want a cherry finish. Not a new cherry wood look, but the old antique look with years patina. More like the stuff you’d find on the a showroom floor call “cherry finish”. As most of you know, maple doesn’t absorb stain very good, so to achieve a dark, rich finish is impossible with stain only. Several years ago, I standardize this finish for my customers and make to sample piece with the steps that need to be...
Blotching is uneven coloring on the substrate, and wood is the substrate I am discussing here. There are many ways to change the look of wood – dyes, dye stain, pigment stain, and variations of both (paint, glazes, and pigment only stains primarily sit on top of the wood and obscure it some or completely, and are not relevant to this discussion). I will simply refer to using all of these as coloring the wood, since the best method to control all of them is the same. I will discuss readi...
Sorry for the False Start Guys… I had the privacy setting turned on when I posted to YouTube. (D’oh!) It’s Finally Here! Whew! It takes a lot of work to shoot a video, edit, and get it posted to the internet. I am still struggling with posting to the internet. My HD file sizes are too big to be accepted by BlipTv and YouTube, and once I get the size down to an acceptable limit, they lose quite a bit of quality. This is a bit frustrating and makes me sad to see al...
Share the Love This modern sofa table was built for donation to a charity fundraising auction. This slideshow was played to generate more interest in the table by highlighting the construction process. Generating more interest generates more money for the charity. The auction was a bit disappointing overall, but my table brought in the more money than anything else. Funds raised at the auction help support programs for people with developmental disabilities. The winning bidder ask...
I like Pink Floyd’s Dark Side of the Moon. This is amongst my favourites to play in the shop and out. The cover, for those of you who don’t know. is this...This has inspired me to get my design head on. So here’s a picture of the box I’ve been designing, over the last week or so...Designed using TurboCAD (no, NOT Sketchup), Size, approx’ 120mm corner to corner and 70mm high. A tall order. Is there any other kind. Its mostly black. I know of a black wood or two...
A little arts and crafts on a Sunday afternoon. I’ve been wanting to try my hand at dyeing and tinting for a while so in typical New California Workshop style I jumped right in. In this round I’m using TransTint dyes from Woodcraft mixed in water. You can see my calculations written on the paper. I diluted about a half an ounce of tint into about 16 ounces of water. I just used bottled water and spilled out a little to approximate 16 ounces. I made up some samples from tiger...
I’ve been experimenting with spirit based wood dyes, as in the project ‘Any Colour You Like’. Mainly though I’ve been working with black. The long term aim is to see if I can substitute black dyed woods, such as Sycamore, for Ebony in my projects. Ebony is really expensive. I think this is mainly because of it’s overuse and therefore currently restricted supply. I use spirit based dye as this doesn’t raise wood grain in the same way water based dyes do. Thi...
- My Journey As A Creative Designer - Woodworking and Beyond - 1815 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1840 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 222 entries
- stefang - 221 entries
- bandit571 - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries