LumberJocks

Woodworking blog entries tagged with 'dry fit'

  • Advertise with us
View HappyHowie's profile

Blanket Chest #2: Dovetail Base or Plinth

12-14-2015 05:29 AM by HappyHowie | 2 comments »

With the dovetails cut both the tail and pin boards, I did a dry fit. These boards went together with ease. The photo below shows how well these joints fitted together. Before I can glue these base parts together I must design the curves for the front and back and then the sides. I did that design on a piece of 1/4 inch thick MDF. I cut out those templates on my bandsaw. Then I sanded the edges smooth. Once I was satisfied with the templates I positioned them on the wormy map...

Read this entry »


View Woodpecker23's profile

Kitchen table Build #4: table dry fit

06-15-2015 07:55 PM by Woodpecker23 | 2 comments »

So, today was my first day off my regular job in 7 days so off to the shop I go and hopefully see some progress today. I am posting this as I am in the shop working on it and need a little break to think… the following picture is the beginning stages of the base mock up In my original plan this is exactly how I had it designed I like the look of it but in the next couple pictures you see I put the table top on (not secured yet, just set it on). I don’t know what...

Read this entry »


View John's profile

Roubo-ish Workbench #5: stretcher tenons and dry fit

01-20-2013 08:46 PM by John | 11 comments »

happiness is a tight tenon! first rightsideup dry fit… finish line in sight! still need to deal with the overhangs, finish the chop, chamfer the arisses, drill, drill, drill, flatten, finish, etc.

Read this entry »


View RaggedKerf's profile

My First Workbench #18: Day 18: The big dry fit!

08-30-2012 12:39 AM by RaggedKerf | 2 comments »

To see the picture heavy version of this post, please click here! Very excited today because I got a lot accomplished! I ended with a dry fit of the entire bench and started work on the leg vise. To get started, I finished sawing the bridle joint on the last leg…best cuts to date! Straight as an arrow!When the last legs were cut, I grabbed the rubber mallet and chisels and hacked out the joints in about 10 minutes. So much faster than before! Sharp chisels are a joy to wor...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com