LumberJocks

Woodworking blog entries tagged with 'drum sanding'

  • Advertise with us
View captkerk's profile

Wall Hung Console #10: Adding the Purpleheart

10-22-2009 04:49 PM by captkerk | 3 comments »

I was able to get the purpleheart inlay done on the end brackets. To make the curved purpleheart pieces, I used the template for the end brackets to trace a line on a piece of purpleheart then cut it out on the band saw. After sanding to the line on the disc sander, I traced a line 5/16” from the edge and cut that out on the band saw. I then attached the piece with the inside curve to the movable fence on my drum sanding jig so the curved strip could pass by the sander with a l...

Read this entry »


View captkerk's profile

Wall Hung Console #9: (in)layin' around

10-15-2009 05:27 AM by captkerk | 5 comments »

I finally got around to working on the console again and I’m now jumping in with the inlays and edge banding the top to cover my biscuit mistake. I cut some strips of walnut and purpleheart to about 7/8” wide and 3/8” thick that would get sanded down to 1/4”. Since I don’t have a thickness sander, I tried out a jig I saw in an old FWW magazine to use a drum sander on the drill press to accomplish the same task on thin strips. The jig is simply a fixed bo...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com