1004 days ago
by mafe |
9 comments »
Hold down clamps!This story are based on a real bench drillpress, all you see are reality, and all at your own risk…
So time for the last part for now, the hold down or hold fast clamps.My solution are quick and dirty…Two china clamps 2,5$, some work.
First file of the little metalpiece, that makes sure the clamp cant part in two.(It’s at the end of the long silver arm).
Then slide it of.
Bore a hole thrugh, that fits, a bolt for your fence.
Make the mounting,...
Read this entry »
1004 days ago
by mafe |
10 comments »
Making the vacuumhose holder!This story are based on a real bench drillpress, all you see are reality, and all at your own risk…
So this is the result! Just to make it easier to understand where we are going.
First cut some scraps up in good sizes, and thickness… At least a little wider than your vacuumhose, you need two pieces.
Bore a hole that match the size of the hose in one, and a hole that match your drillpress colom in the other.
This is a hole!!!
This is som...
Read this entry »
1004 days ago
by mafe |
10 comments »
Making the table, fence, and shelf pin jig!This story are based on a real bench drillpress, all you see are reality, and all at your own risk…
Ok some of you allready have seen my drillpress table, but since I like to shoot photo, and some more has come, I have finally finished my material for the blog (Some will say finally!!! This guy has writing fever, the truth are that I have been down with a throad infection, so I could not be in my shop). To my buddys, thank you for your patie...
Read this entry »
