LumberJocks

Woodworking blog entries tagged with 'drilling holes'

  • Advertise with us
View Trapper brandenburger's profile

Marine Corps Naval cannon project #4: Trunnion mounts

07-22-2016 10:37 PM by Trapper brandenburger | 4 comments »

Finally getting to some wood working today. I was able to cut out the radius where the trunion mounts will set. I cut lots of slits up to the radius line on our big band saw and then removed the excess with a jig saw that had a ten inch blade on it. Then smoothed it all out with a rasp and drum sander attached to a drill. Once the brass hardware fit the way I wanted it to I marked the holes and drilled them out part way on the drill press as it only plunges 6 inches. I went the rest of the wa...

Read this entry »


View degoose's profile

Torque Workcentre at work.. #19: Drilling holes for shelf supports.

02-14-2010 09:53 AM by degoose | 14 comments »

I had to make some holes for shelf supports in the entertainment unit I am making, so I set up the Torque Workcentre ...I used the travel limiting stops on the Y axis… marked the distance on the sides of the boards…. locked the X axis …marked the back fence in line with the router bit… I used a spiral upcut 8 mm bit…moved the router to the backstop on the arm and drilled a hole them moved the router forward to the stop and drilled another hole… moved the ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com