We’re going to use a Dremel router to make a sign with recessed lettering. I suggest barnwood because of the contrast between the weathered surface texture and ‘fresh cut’ letters. I also have enhanced the letters by burning (pyrography) the edges of the letters for increased readability. Of course you can scale up to larger routers if you chose. Stock: Barnwood 2”x10”x24” Suggested material and dimensions Safety: Goggles, F...
So among the few shotcuts that were made by providing the R4511 at the market price was the fact that it only came with a splitter+integrated blade guard but no additional low profile riving knives (for non through cuts). for the price this saw comes at – one can’t complain, and the fact is- it does have a riving knife mount system which is a good base to start with. solution: homemade riving knife made out of 1/8” plate of 6063 aluminum: EDIT: If I’d do this again,...
Here I go again. I have had a idea for a while. It began with my first wood inlay. I wanted to do more. I wanted more colors, more this, more that. So I searched for idea’s and found people who did inlays on gourds. So I looked and read, and said, “Hey, I can do that in wood.” After doing a few of these I still wanted more. More color, etc.. So for Christmas I get this fancy new Dremel with all the attachments, and I say to myself “Now I can do more.” ...
Now that the letters are outlined with a stop-cut we want to ‘rough out’ the material inside the letters. I use clamps to hold down the wood so that there is no movement while routing. The clamps are repositioned as necessary for a clear work space. 01 Clamp Wood ————————————————————————————————...
Crossing that invisible line from using traditional handtools to using powertools was a hard stepp for me. Growing up, my grandfather, my dad and uncels would get strikt if they ever saw sandpaper on the workbench vile carving. Bottom stamping or patterning ,and the use of sandpaper on carvings was considered something used by amatuers or someone trying to hide their errors, In the old woodcarving School we where not alowed to have sandpaper on the workbench at all, we got told to remove i...
Well folks, it has been quite a while since I’ve been able to get on here and talk about the project. If you haven’t read any of the previous blogs, this is a wine rack that I built for my brother’s wedding. If you want the basic construction, see the prior posts. From here on is the little decoration details… I hope I don’t have too many pictures ;). I think I’ll let the pictures do some of the talking for me but I want to capture the whole process....
My Journey As A Creative Designer - Woodworking and Beyond #43: Sometimes the Lazy Way is More Work Then Anticipated (But We Learn Something)
OK. This is getting scary. Do we only get so many good days in a given time period? Or are we really the masters of our own destiny? I am probably over-reacting, but I just really like when things work out like you want them to. I am kind of hoping that it is because thought and planning went into something that it turns out well. That gives us some sense of control. I would hate to think that it is only by chance. So where were we? Ah, yes. The autumn leaf candle tray. As I was sa...
My Journey As A Creative Designer - Woodworking and Beyond #18: The Road Trip Did Wonders! I Can't Wait to Get Moving!
Well, after taking the day on Saturday and trying to get some random things around here done on Sunday, its back to some full force work for me. The road trip was really nice. We couldn’t have picked a better day. It was bright and sunny and there was one point in the afternoon where we actually had to put the top up on the car because it was so warm. That’s highly unusual for Nova Scotia and it was one of the hottest days I can remember in the six years I have been here. P...
It’s time to let the creative juices flow again! Thousands of LumberJocks, five sponsors, a whole bunch of amazing prizes and one category. That’s the summary of our LumberJocks Woodworking Awards Summer 2010. Our goal is, as always, to highlight the creativity of all woodworkers – regardless of skill level – through the use of materials that are available to all. So here is the Summer 2010 topic: Fluidity – “Like grasses swaying in a summer breeze, the fl...
After several hours of carving with my Dremel tool over the last two days, I completed the custom checkers for this project. This was my first attempt at wood carving and with 48 sides to carve, it was a bit tedious, but not too difficult. My skills improved a good deal by day two and I took some extra time to go back over the first day’s checkers and make sure they were all pretty consistent. I took some video of the carving process to post as a separate blog entry once I have...
- My Journey As A Creative Designer - Woodworking and Beyond - 1730 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1755 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 302 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries