I recently came back from spending a couple months in Kansas for work. On one of my weekend trips to an antique store, I found this lonely, broken miter saw tucked in a dark corner. You can see the broke handle, but you can’t see the horrendous rust on the back side. For $10, I decided to give it a new home. Of course, if the saw knew what I was planning to do to it, it might not have agreed to follow me out of the store. Since I already have a Disston miter very similar to t...
No job should be this much fun. I know I have said it before, and that some of you may think that I am exaggerating, but I find if anything, I tone it down. This past week and a half should be proof of that. In the last week and a half, I drew up seven new candle trays as well as a new project for the August issue of Creative Woodworks and Crafts magazine and pretty much got all the prototypes finished. I still have one more tray that I didn’t even really show you yet, but I wil...
Here is a great versatile tool to would be great for any DIYer to own.
After several hours of carving with my Dremel tool over the last two days, I completed the custom checkers for this project. This was my first attempt at wood carving and with 48 sides to carve, it was a bit tedious, but not too difficult. My skills improved a good deal by day two and I took some extra time to go back over the first day’s checkers and make sure they were all pretty consistent. I took some video of the carving process to post as a separate blog entry once I have...
Howdy, I started mounting the table top today. It occurs to me, in hindsight, that I may have caused myself a lot of frustration. I’ll find out soon enough when I try to place the diamonds. Be that as it may, it’s turning out pretty well but you can still tell that a rookie is doing the work. I was able to use the warped pieces but now I have a few pieces that are slightly higher than others. I just bought myself more hours of sanding. I’ve also got a few gaps. A f...
Now that the letters are outlined with a stop-cut we want to ‘rough out’ the material inside the letters. I use clamps to hold down the wood so that there is no movement while routing. The clamps are repositioned as necessary for a clear work space. 01 Clamp Wood ————————————————————————————————...
Welcome back, I got the eye sanded down and it looks pretty cool except for the air bubbles. I knew I couldn’t get through without a few big ones. I rushed a little to much when I applied the epoxy. I will take care of it later.It will probably get filled in with another color but if I don’t like it I will just carve it out again. So while me and my family were out running around today we went by one of the big box office supply stores and I finally picked up some carbon pa...
Here I go again. I have had a idea for a while. It began with my first wood inlay. I wanted to do more. I wanted more colors, more this, more that. So I searched for idea’s and found people who did inlays on gourds. So I looked and read, and said, “Hey, I can do that in wood.” After doing a few of these I still wanted more. More color, etc.. So for Christmas I get this fancy new Dremel with all the attachments, and I say to myself “Now I can do more.” ...
I got a Dremel Multimax MM20 today and thought I would share it with you all. Enjoy.
We’re going to use a Dremel router to make a sign with recessed lettering. I suggest barnwood because of the contrast between the weathered surface texture and ‘fresh cut’ letters. I also have enhanced the letters by burning (pyrography) the edges of the letters for increased readability. Of course you can scale up to larger routers if you chose. Stock: Barnwood 2”x10”x24” Suggested material and dimensions Safety: Goggles, F...
- My Journey As A Scroll Saw Pattern Designer - 1184 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1206 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 299 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 201 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- BritBoxmaker - 159 entries
- shipwright - 159 entries
- scottb - 144 entries