280 days ago
by PurpLev |
3 comments »
while working and designing my router table I noticed that there are no Incra Models on Sketchup 3D Warehouse at all. I do not have any of the LS positioner systems, and would have liked to have a 3D model version to incorporate into my design and see how it would work with different sizes table tops…
I do however have the Original Incra Jig, and figured I could model it out, and put it on 3D Warehouse for anyone that might be interested in it, and could use it in their designs. so w...
Read this entry »
802 days ago
by David |
7 comments »
Download PDF Instructions to Build Your Own Vacuum Press Bag Stoarge Container
Read this entry »
879 days ago
by David |
6 comments »
This blog entry shows how I install the small (1 inch diameter x 3mm thick) brass Makers-Marks on my projects. I like the traditional feel that the labels give a project. I prefer painting the recess black so that when the label is installed there is a small subtle black reveal line around the outside edge. This is strictly personal preference.
This Installing a Makers Mark Tutorial is available as a PDF download on my website
I get my labels from a very kind chap in England – his conta...
Read this entry »
1015 days ago
by David |
25 comments »
How to Make Custom Waterslide Decals
This Waterlide Decal Tutorial is available as a PDF download on my website
Materials List
• Clear or White 8.5×11 waterslide paper• Deft Gloss Clear Lacquer• Brayer Roller• Paper Towels• Bowl with clean water
SOURCES FOR DECAL PAPER WATERSLIDE PAPER
• MicroMark• BelDecal
1. Make decal design on your favorite graphic application.I use a Mac based system so I will share the details of how I do things, however, you can do this on any co...
Read this entry »
