Hi Folks, There is alot of Domino support and bashing, as well as Dowelmax support and bashing on various woodworking forums. Typically the owners of the tools talk about them like they are just about the second coming. The detractors talk about their excessive (relative) price. The Domino “won’t pay for itself.” The Dowelmax is no better at 250 bucks than a beadlock is at 50 bucks. Usually stuff like that. If you read close enough or care, many of the supporters an...
Well, Christmas was a big hit, but I had to put a few finishing touches on the horse. Karson was observant to point out that there wasn’t any place for the little rider to put his feet, it needed ears, and it needed some finish on it. I mixed up some amber shellac flakes from Lee Valley in a 2# cut. Thanks Bob #2 for the math help on small batches. I was scratching my head a bit. First I used Dowelmax to align the ear blocks and to centre drill the top for the leather ears. I ...
I’ve decided I really like making paddles. Very creative outlet and not only is it artistically challenging but the dynamics of the blade design are really interesting as well. I’ve got 5 paddles in the works at the moment but #3 is different from my earlier ones. Straight shaft, teardrop, no laminations, dovetail. I added some geometric woodburning, somewhat primitive looking. It also has a channel, kind of the reverse of a dihedral feeding into the dovetail. Paddle #3 I...
I wanted to put a bolt through the stretchers in order to tighten up an seasonal slack that might occur with this bench. The perfect thing to do, (perfect only because I thought of it,) was to use two dowels for anti-rotation pins and then put a bolt through the stretcher. This is just a short blog entry today. This video is how I used Dowelmax to align the stretchers to the base. In part IV of this series, I’ll discuss the top of the bench, and move on to the skirt and vise i...
During my recent shop healing session, I realized I needed a better way to store my drills and chargers. This simple wall-hanging “box” did the trick. I also wanted to make the project fast and easy, so I decided to try out the DowelMax for the first time. The system is a breeze to use and produces strong reliable joints in just a fraction of the time it takes to create a traditional mortise and tenon. Fee free to download the SketchUp Drawing for this project if you want...
I started with taking measurements of the initial cabinet and combining that with measurements taken from the miter saw itself. With these numbers in hand I created a basic plan in Google Sketchup. Usually I put together a rough drawing and some basic numbers and then I’m off to the races. This usually means I am constantly “planning” throughout the whole build. Learning to use Sketchup is helping me get away from this. I have also made drawings at full scale to see how thin...
Yesterday, I took my new TS Aligner Jr. and DowelMax over to a friends home. (I purchased both of these tools during my recent visit to Canada.) I was meeting with him and another Mate for a BBQ lunch and a chat about our mutual interest in woodworking. All three of us served on the executive committee of our woodworking club, so we have formed a close bond. I showed them the results of having calibrated my table saw with the TS Aligner by taking a sample of a perfectly fitted Dowe...
WARNING! Reading this blog and watching the included video will take 8-10 minutes of your life that you will never get back! Bob #2 and I were meeting up last Saturday to attend the Edmonton Woodshow. The show had offerings from Delta, Hitachi, Steel City, General, Dewalt, Lee Valley, Lie Nielsen and a mixture of local guilds and arts and crafts distributors. Overall, the show was quite good. There was lots of machinery there and Bob and I were able to meet up with Jim Lindsay, inv...
From Marine Surveying to inventing a woodworking tool: why of course, what else would one do? This week, I had the pleasure of speaking with Jim Lindsay, President of OMS Tool Company and inventor of the DowelMax. The HistoryI asked Jim how the transition to inventing took place and he shared a bit of history with me. In 1995, he was ten years away from retirement and not really looking forward to it. Then, one day as he was working in his shop, he had the idea for the soon-to-be “Do...
Well after another two months of stewing I decided the best way to get rid of temptation was to give in to it and I bought the Dowelmax. Delighted with both the product and the service. As for the price… 300$ in the bank earns 2% after tax i.e.$6 a year. With inflation at 4% this means I was losing £6 a year….misery.Converting the cash into the Dowelmax means I have an asset which will last a lifetime, (or several lifetimes), appreciate in value, make/save money by using it on p...
- My Journey As A Scroll Saw Pattern Designer - 1613 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1638 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 181 entries