I own a die and tap to thread wood but the diameter is 3/4” and this is a dowel size I can’t find locally.I have thus decided to try and build a rounding plane / dowel maker to create my own 3/4” dowels. A rounding plane is is like a giant pencil sharpener with a cone shaped inlet and an outlet bored to the exact size of the desired dowel.I never held such a tool in my hands and the only ressource I have is an old Fine Woodworking article I remember which gave 2 guideline...
I’ve been fiddling with wooden hinges, and can’t get good dowel stock. Epecially dowel stock that matches the species of wood I’m working with. I gleaned this jig from another Rob Cosman video. I took a 2” piece of walnut from the scrap pile. I drilled a 1/4” (0.247” actually) hole in it close to one face. I took a few passes through the drum sander to just show the hole cut. I chamfered one end to accept the workpiece stock. I clamped an old plane...
Well, I never did have the time to post the progress of this project as the actual progress occurred but it was completed and now I have a few moments to finish up this series and check it off my list. This project was much more time consuming than I anticipated but a good learning experience as it had several challenges. I’m relatively proud of it and KT loves it as we have a closet again (our clothes have been hanging from a hand rail supported by the two sides of our loft balcony ...
I frequently I need to cut multiple dowels to a uniform length. Some projects require only a few, while others – like the small race cars I make – require hundreds. In the past, I usually drilled an appropriately sized hole through a block of scrap wood, clamped it to my miter gauge, and rigged a stop block on my table saw fence to gauge the cuts. Although this worked reasonably well, ends were often splintered, and I never seemed to be able to find the block the next time I needed i...
With the horse finished (literally as in 2 coats of shellac) the only thing missing was 2 handles for the ride. as it seems the horses ears were a good alternative and worked well, but proper round handles would probably be more comfortable for younger ones and well, I have the mounting holes for them already so better put them to good use. My original idea was to use mahogany for the handles as I have a left over of mahogany that was my workbench wagon vise handle that was transformed int...
Thanks to the cold weather and some other things that had to be done, progress has slowed on this project. Last week I completed the drawer boxes and rough dimensioned the boards for the top. Today I finished dimensioning the top and got it all glued together. I was able to warm my shop up to about 70 today for the gluing, but brought the top in over night so I wouldn’t have to heat the shop as the outside temperature drops. In this picture, the grain on some of the boards loo...
Back at it….FINALLY!!!Considering my last entry on this project was almost 2 years ago, I thought I had better get going. I resumed work on my workbench recently. I had most of the trestle components laminated up (legs & feet anyway), so I started working on the mortises & tennons. I started with the feet, which required 2 big mortises (1 1/2” x 2 1/4”) 2 1/2” long. I drilled most of the material out with a 1/4” drill bit followed by a 3/4” fors...
Happy Fathers Day to all of my LumberJock buddies, and a belated Happy Mothers Day to all of the Lady Jocks! I am looking forward to using the LumberJock CyberToolShare feature to explore everyone’s shop and check out what goodies you all got for Fathers Day! I had the privilege and pleasure of spending the last two days working in my shop. I made a lot of progress on my cherry quilt chests. I am under a time crunch as these need to be delivered at the end of the month, so it was great...
In this time lapse, i’m building a trestle coffee table from Walnut. At this point i’m attaching the underside storage to the top of the table. The underside of the top and entire storage shelf has been sanded up to 500 grit and buffed with a wool pad to burnish and clean out the pores in the wood. What a shine one can achieve from just bare wood, its amazing, silky smooth! First I measure and drill the holes for the 2’’ x 3/8’’ dowels that will attach...
From Marine Surveying to inventing a woodworking tool: why of course, what else would one do? This week, I had the pleasure of speaking with Jim Lindsay, President of OMS Tool Company and inventor of the DowelMax. The HistoryI asked Jim how the transition to inventing took place and he shared a bit of history with me. In 1995, he was ten years away from retirement and not really looking forward to it. Then, one day as he was working in his shop, he had the idea for the soon-to-be “Do...
- My Journey As A Scroll Saw Pattern Designer - 1696 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 92 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1721 entries
- frank - 417 entries
- dbhost - 403 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 287 entries
- William - 258 entries
- shipwright - 232 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 204 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 191 entries
- Dave Rutan - 191 entries
- Rustic - 190 entries