The basic cutsThis should have been first… I know this was how the blog should have started but I had not planned to take photos when I started so this is why – but since I decided to make some more planes I took pictures after. So here it is ‘The basic cuts’. As so often recycle is the basis – here a piece of Ash wood that comes from the cut out for a kitchen sink.Its big wonderful staves that I simply cut out again by cutting in the glue line, ...
Low angel shoulder planeDrawings Analysis and Documentation… I promised to post a set of drawings for this project, normally I will not do this, but due to the fact I was spending the time drawing it to figure it out I decided to make a few drawings to help others build.(And no one just do that, it took 6-8 hours of work, and 8 hours of building and thinking, so just thinking of the fact that I should receive 75 dollar from a woodworking magazine and be happy makes me laugh it would ...
Low angel shoulder planeMaking the body part two. So here we go. In last blog we left the body to dry.Now time to make one of the sides flat by grinding of the pin ends. Then the band saw, for shaping that body.In the back left my future dinner knifes, its Swedish steel and eight different woods for the handles, in this way people can choose, and find a favorite (sorry it has nothing at all to do in this blog). Cutting after the circle that I decided for the design. Shaping and...
Low angel shoulder planeMaking a blade from another plane iron. This is the second part of the blog, in last part the plane body was made. This is where we will end, Div’s shoulder plane on top, then mine and finally what this part is about; the plane iron. Since I have a handful of block plane irons I got for next to nothing, I will ‘kill’ one of these.Measure the width of your shoulder plane and add a little for later tuning (I added 1mm).Draw this on your plane ...
Low angel shoulder planeBecause it’s fun…. Before you start reading I want to tell that I finally managed to make it run!It was giving me a headache, but once I found out the problem it was right on. Here is a video showing it in action. But I will blog a improved version also in this blog serie. Not so long ago I followed a class here on LJ with Stefang where we build a bucket, part of this project was to make a convex hand plane (Krenov style). So what have this...
- My Journey As A Scroll Saw Pattern Designer - 1391 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 84 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1415 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 389 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 229 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 194 entries
- Rustic - 185 entries
- shipwright - 184 entries
- Chris Davis - 183 entries
- stefang - 168 entries
- BritBoxmaker - 167 entries
- PurpLev - 163 entries