LumberJocks

Woodworking blog entries tagged with 'dewalt 735'

  • Advertise with us
View pintodeluxe's profile

Dewalt 735 Mods and Repairs #1: Dewalt 735 Planer Dust Collection Fix

12-09-2014 05:12 PM by pintodeluxe | 8 comments »

Have you ever noticed the depth crank on your Dewalt planer getting tougher to turn? Do wood chips collect under the top cover near the blades? If so, then I may have the solution for you.Unplug the planer and remove the top cover with the supplied hex wrench.-----Remove the dust collector fitting by pressing the spring loaded pin, and twisting the fitting. -----Remove the three red thumbscrews to loosen the dust shroud. -----Carefully lift the infeed side of the dust shroud, and gently p...

Read this entry »


View BJODay's profile

Trying new woodworking skills #3: Tested the planer

09-01-2013 01:31 AM by BJODay | 3 comments »

The planer is all set up. I ran some 1×4 pine through it. Worked very well. Nice and smooth. Some snipe on a few boards. I will adjust the outfeed table tomorrow. I am too tired to do it tonight. My dust collection system is under powered. It works but chips collect in any low spots and corners. The 735 has a blower to help eject chips. I hooked it up to my dust collector. It pressurized my piping system and blew chips out of my jointer, router and miter saw. My dust collection system...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase