288 days ago
by Martin Sojka |
46 comments »
Ever wondered how to become published? How to see your unique creation on the pages of your favorite woodworking magazine? Well, now is your chance to achieve just that! We’ve partnered with Popular Woodworking magazine again to present a new, exciting challenge for all members of LumberJocks.com. (If you’re not a member, now is the time to join us!)
This time it’s all about the bookcases. Everyone needs them. Are you ready to design a bookcase that catches the eyes of Popu...
Read this entry »
304 days ago
by Martin Sojka |
31 comments »
Few days ago, I decided to update the LumberJocks look. The header was becoming too busy with all the navigation links and that was the main motivator. And I wanted bolder and visually more appealing page titles as well.
After playing in the graphic design program and adjusting the code I ended up with the following new look and updates:
Tabbed navigation with the highlighted current section
All of the “my home, my…” links moved to just one drop-down menu that ...
Read this entry »
350 days ago
by Blake |
12 comments »
Ok, so the next piece of shop furniture that needs updating is my radial arm saw table. The original table I built was meant to be a temporary home for the old saw after its restoration about two years ago.
I spent some down time at work drawing a few different designs and ideas and then put it in sketchup when I got home. Please… let’s discuss the design before I actually make any cuts! I am totally open to any constructive criticism.
Here is what I have come up with so far:
Th...
Read this entry »
365 days ago
by Todd A. Clippinger |
31 comments »
Finished!
Well it’s been a long journey and it did not end without one extra push.
I finished installing the copper handles Monday by 11:30. There was a couple of scratches but I was certain I could buff them out. This is a skill that goes with the territory. I worked on the finish for the next six hours and I could not get the finish to blend.
How to Remove a Scratch-
After exhausting all other options this is what I resorted to today:
Yes you are seeing it correctly...
Read this entry »
368 days ago
by Todd A. Clippinger |
26 comments »
Another Milestone
I am pretty excited to share with you guys today’s progress. I got all of the handle pieces finished!
Next I have some touch up on the doors and the final install. I am sure I will have a full day of technical sweating.
I had to brush the pieces again on the wire wheel to brighten the finish. I then hung them from the ceiling and wiped them down thoroughly with acetone. This strips any oil from the surface.
I sprayed them with an acrylic resin lacquer by Sh...
Read this entry »
370 days ago
by Todd A. Clippinger |
26 comments »
Getting Closer…
Well guys I can hardly stand it! I am getting so close to done on this project and yet there is so much to do. I just want to go home and be with my wife and my dogs so bad.
This job has been a nail biter every step of the way. The more I get done, the more work I have at risk if I should screw up. A mistake could cost the equivalent of a good used car – NO KIDDING.
If you want to do high-end work, the risk is high too. That is one factor most don’t...
Read this entry »
373 days ago
by frank |
4 comments »
....furthering my ganders, as one would take on examining their progress in the principles of what it take to work the wood by hand! Some-times it does my soul best to just stop and take an inventory of what is happening here with the tools and the wood. Many are the stages of phases that go into the making of a piece of ‘wood art’....design, working the wood by hand, but there all-ways is the need to pay attention to the care and detail of my tools and wood.
Further Notes on: ...
Read this entry »
376 days ago
by Todd A. Clippinger |
34 comments »
Exciting Progress..
I am making some great progress on my closet project. I currently have the copper rods in a machine shop where the parts are being fabricated.
The clients and I had talked about changing the lights to better illuminate the fine work that I have produced. While the metal work is being done I decided to go ahead and install the new lights.
WOW!
Man-OH-Man! Does it ever look fantastic!
Here is the closet with the old lights:
Here is the closet with the n...
Read this entry »
386 days ago
by Todd A. Clippinger |
18 comments »
Success-
I installed the big door today with a helping hand. The careful planning paid big dividends in an incredibly smooth and accurate install.
Before doing the veneer work, I installed and fitted the doors. The doors were then taken to the shop and finished. The hinges were numbered and went back into the same locations. This meant that the final install required no additional adjustment. This is what I call jobsite theory, and it worked out this time.
Getting a handle on it&...
Read this entry »
387 days ago
by Peter O |
1 comment »
Workshop SafetyI can’t overstate the importance of workshop safety. Don’t wear loose clothing, jewelry, or hair. Your tools come with guards for a reason – use them! If you aren’t sure the action you are about to take is safe, then assume it isn’t and figure out a better way to do it. Keep your work area clean, especially underfoot. If you are using a tool – power tool or hand tool – wear eye protection. The best protection against injury is your brain – it m...
Read this entry »
1 ... 3 4 5 6 7 8 9
88 entries
