8TH ANNUAL SATURDAY FEBRUARY 8, 2014inside the Niagara Falls HOME DEPOT7190 Morrison Street L2E 7K510:00 am – 5:00 pm Woodworking CompetitionTwo categories to enter: Small Project (has to fit inside a 2ft square box) Large Project (greater than a 2ft square box)PRIZES! PRIZES! and more PRIZES! Woodworking Seminars 10:30-11:3012:00-1:00 1:30-2:30 3:00-4:00 All Day Demonstrations Niagara Woodcarvers AssociationNia...
NIAGARA WOODWORKING SHOW SATURDAY NOVEMBER 5, 2011 Niagara Falls Home Depot 7190 Morrison Street 10:00 am – 4:00 pm Woodworking Competition PRIZES! PRIZES! and more PRIZES! Woodworking Seminars All Day Demonstrations Kid’s Workshop www.niagarawoodshow.info
Got up early yesterday and headed up the mountain to Toowoomba… what lovely place… cold, windy and wet but still a lovely place. Took the TWC up to the Toowoomba Woodcrafters Club at their clubhouse/workshop located in the Showgrounds for a Demo…what a turn out.. over 40 folks turned up from all over to see the TWC… nice to have a group genuinely interested enough for quite a few to travel up to 2 hours to attend. There were members from the Laidley and Pittsworth c...
I am always excited to meet up with another woodworker and especially another pro. The conversation seems to go to a whole other level, especially when both of us are equally passionate about the same things. Those things would be woodworking, design, and sharing the knowledge with other woodworkers. Last night was just about as good as it can get when Andy Chidwick stopped by with his family at dinner time. He is an excellent craftsman, designer, and he is also passionate about sharing th...
5th Annual NIAGARA WOODWORKING SHOW SATURDAY OCTOBER 30, 2010Niagara Falls HOME DEPOT7190 Morrison Street L2E 7K510:00 am – 4:00 pm Lumberjock Meet and GreetWhere in the world is MsDebbieP?Debbie is planning to attend and is asking if anyone wants to do lunch? Woodworking CompetitionTwo categories to enter: Small Project (has to fit inside a 2ft square box) Large Project (greater than a 2ft square box)PRIZES! PRIZES! and more P...
Given Sam Maloof’s passing, I thought I would post the link to a web site that shows Sam in action (there are other woodworking videos as well). His videos are in the Video Library under A Woodworking Experience. http://www.woodworkingchannel.com/dolphin/vidego_video_library.php
It was a pretty good day, despite the gray weather outside. I arrived at the show today with a short list of things to accomplish. Highest on my priority list was to get my battery issue for my Makita 18v Li solved. 3 of the 4 batteries have for it have gone bad, in less than 20 charges. I dropped by the booth yesterday and spoke with the district manager and he asked that I bring them in so they could test and replace them if needed. Got this done right away. Nice guys and eager to get th...
Hello, In this Demonstration Video, I help new scrollers understand how to Apply their pattern to their wood. This is my Very first Demonstration Video so bare with me, as my Video motto is “Whingin it Hobo Style” it’s not professional, I record as I go, as long as my information is Correct and I display the means of getting the Job done, Then this is how I will continue to do my Videos! hope everyone enjoys the Video… Any comments, feedback, questions, etc...
3rd Annual Home Depot Woodworking Show SATURDAY OCTOBER 25, 2008St.Catharines HOME DEPOT20 YMCA Dr.L2N 7R610:00 am – 4:00 pm Woodworking CompetitionTwo categories to enter: -Small Project (has to fit inside a 2ft square box) -Large Project (greater than a 2ft square box)PRIZES! PRIZES! and more PRIZES! Make something great and come show it off! Woodworking SeminarsHow to sharpen your chisels and blades 11:00-12:00Introduction to the scroll saw 12:00-1:00How to s...
A Scrimshaw Art Journey: A Lumberjock’s “Short Version” of the Techniques for Decorating a Powder Horn by: Mark A. DeCouwww.decoustudio.com (This writing, photos, and artwork are protected by copyright by M.A. DeCou 2007-2010, all rights reserved, please ask permission before using any part or component.) =============================== UPDATE 9-25-2012:This past summer I had four students at the John C. Campbell Folk School class on Powder Horn Building and Scr...
- My Journey As A Scroll Saw Pattern Designer - 1614 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1639 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 182 entries