Hello again friends, I’m made a lot more progress since my last post so I will break it up into a couple of posts. These are pretty straight forward, I’ll let the pictures do most of the talking. Deadman: BrandonW gave me this piece of Jatoba when we first met, Thanks again Brandon! I decided to use it for my deadman. Here I’m using the Paul Sellers trick for a makeshift end vise, it works ok but I cant wait to have a wagon vise. Very dense wood but it planes...
Ah the pith. That very core of the tree, that for some reason, is remarkably unstable in use as lumber. The inclusion of the pith in some of the beams I have obtained all but ruins an otherwise solid thick chunk of wood. It really pithes me off. All kidding aside. I can probably still make some good use out of these beams, even the ones with the pith in them, with some thought into my cuts. I was contacted last week by an old woodworking acquaintance, Maxwell. He told me he saw my b...
I don’t think I’ve really covered the dead-man much in this series, so here’s a short blog on it. The purpose of the dead-man is to support longer boards that you have placed in your leg vise for edge planing. The design I’ve chosen for mine is a fairly bland rectangular shape as you can see here: So, to build it I had a piece of jatoba about 5/4 thick which I hand planed and cut to size. Not sure of the exact measurements here, but I could take a tape measureme...
Scandinavian workbench restoreOne legged dead man walking… Ok some awful undertones in that name…Actually it is just a simple dead man for the new old workbench. Just a long piece of wood, not sure but think teak. Marking the center line. Drilling holes for every two inch or five cm. And a little dowel that fits the holes with a cross dowel that makes it easy to pull out. Use the end vice to hold it. Get the idea? Now it is just to use it.I udsed it for pla...
Hello LJ Buddies, Here is my most recent progress. I’ll let the pictures do most of the talking. I previously milled the grove on the underside of the bench. I cut a rabet 3/4” in from the front and glued on a 3/4” tenon. This was cut by hand. First had to perfect the fit. Laid out the design with a wax pencil. Bandsawed the curve then cleaned up with a spokeshave. After drilling the holes and cleaned the Jatoba with Acetone and glued on the tenon an...
When I built my bench I didn’t make a deadman. Then one day I needed one and threw this together. A quick and easy but it worked. Not well, and looked like crap so I knew it has to be improved. So what should I use So quit some time ago I got some 2” planks that had been stacked outside for a while. I cleaned them up a bit and stacked them in the attic. So I picked out 2 nice pieces of oak. Ran them through the planer, cut and shaped into a couple of de...
Installed Shelf Boards Before I started on the dogs and deaman, I installed the shelf boards. Screwed into the cleats at both ends. Of Dogs On to the dogs. I followed a diagram I found on the Benchcrafted site (sorry, don’t have link), and made the body of the dogs from jatoba. Springs from ash. The springs were easy – just sliced off the side of a piece of ash. The dogs were a bit more complex shape. Mostly done on the table saw, with one of the cuts on the bandsa...
- My Journey As A Scroll Saw Pattern Designer - 1634 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1659 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 228 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- robscastle - 188 entries
- BritBoxmaker - 188 entries
- Rustic - 188 entries
- Chris Davis - 184 entries