So fo the past while I have been sanding the body to shape. I was also doing anything I could to avoid facing the challenge of cutting the body apart. I was afraid of doing so because it is not a cheap chunk of wood, and also all the effort put into getting the shape correct shape made it more special. Then one day I decided it had to be done and I did it. And that new bandsaw got quite the workout. It did go better then I expected with the minor flaw here and there. after the walls were ...
After a month of development based on the feedback I got here, I finally managed to release Carpenter Pro, this time, it calculates how many plywood sheets are needed to finish your project and get detailed cutlist diagram for each stock sheet needed. It allows you to specify the dimensions & grain direction for your stock sheets material, specify the dimensions and the required grain direction for each part you need to cut for your project, and set the kerf amount, then watch this app ge...
I recently finished working on a cutting algorithm app for the iPad and iPhone called Smart Cutter, and wanted to share the app with every one hoping get some feedback from carpenters and wood workers. Smart Cutter finds the maximum number of small pieces cut from a larger sheet of paper with minimum scrap. It employs a state of the art algorithm to generate the maximum number of small pieces cut from a larger sheet of paper, wood, cloth or any other material, with minimum waste. Whether y...
Well for a while now my wife has been really wanting a hall table to put ummmm, well hallway stuff on. I have for some reason been really struggling with the design. At first she wanted it to have a shelf on the bottom to hold other odds-n-ends. After playing around with it and throwing wood here and there, it was just not going to work out. The bottom shelf would have been a very tiny 6” deep. What can I say though, I didn’t give up trying to build it. After I got some of the leg...
In response to some questions about how this pattern is made… I’m not sure if this is the only method, but here’s how I did it. Here’s the original project I posted: http://lumberjocks.com/projects/53452 Hint: When you look at the board, long ways going left to right, every row is a different size, but every group of 2 rows are all the same size! Solution: First you rip strips like you would for a regular end grain board, but in a progression of widths from l...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #6: Cutting Sharp (Acute) Outside Corners
By now most of you should have a bit of a feel for cutting some nice outside curves on the scroll saw. As we know however, most designs also consist of some nice sharp angles. Making accurate corners can be a bit of a challenge when you are new to scroll sawing, but with a few quick tips and a little bit of practice, you will find it is not as difficult as you may have imagined. Before long you will be scrolling those angles with little effort or thought. In order for me to show you ...
Hey LJ! Sorry to anyone who got the wrong video first time they viewed, I embeded the wrong video but that has now been rectified. I am by no means what you would call an experienced hand tool user and I tend to use them in conjunction with my powertools. Nevertheless following a hand tool project where I made some bookends which I did a few weeks ago… you can check that out by clicking on the link… Here! Anyway after that video I was asked about cutting dovetails so here...
Just completed my second woodworking related video. This one about a plywood cutting table that sits on my Folding Sawhorses and makes my life much easier when it comes time to rip down some sheets of plywood or MDF. Hope you all enjoy!
I found time to get some shop time, and wanted to get back on track and get this project going (hard to do after a long pause). last time around I was milling the lumber, when my planer broke down on me in the middle. I have then milled some boards with hand planes, and fixed my planer, but at this point, I was a bit confused what was milled already, what thicknesses, and how much material do I have (more of a do I have enough? curiosity). I still had to mill the apple lumber and add it as...
OK, so now that the kitchen challenge is all over, I guess it’s a good time to post a blog regarding kitchen items … or… hold on… um – oops. too late. Oh well, I guess I’ll blog this anyways. So, the plan is to make a bread board. for the time being, the design shall remain unseen and will reveal in details as this blog series will progress. The board is primarily made of hard maple that I am recovering from bowling alley floors (I still have about ha...
- My Journey As A Scroll Saw Pattern Designer - 1584 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1609 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 186 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries