The second episode of our new hand tool woodworking show is all about one of the most essential tools for the old-timey woodworker: The marking gauge! In fact Stumpy applies his woodworking wit and wisdom to three types of gauges, building a marking gauge, a mortise gauge, and a cutting gauge; all three with just a few hardwood scraps and a little bench time. At the end you’ll have a deeper understanding of this critical tool, not to mention three of them to call your own! The Ol...
Japanese cutting gaugeby mafe’san So we are back on the Japanese road.I decided that on the day of New Year’s Eve I needed to make and finish a little wood project that would make me smile. Here first a drawing I made the night before and then made it after. This blog starts here.A wonderful piece of wood from our LJ friend Jusfine Randy.And not just a piece of wood but also a little message on it for me.Here you can read about the gift story.Thank you Randy, and a happy ne...
Mike & Mads cutting gauge the box (blog)A gift to a wonderful friend. THE BOX: This is the last part of the series, so for you who step in here, please go back to the beginning: http://lumberjocks.com/mafe/blog/21939 The box could have been a blog of its own, but I think it belong here, since it was made for Mike? So after making Mike this cutting gauge, I thought it looked unfinished without a custom made box. I took some pallet wood that I had left from my bucket pro...
Mike & Mads cutting gauge manual (blog)A gift to a wonderful friend. MANUAL: This is the third part, so for you who step in here, please go back to the beginning: http://lumberjocks.com/mafe/blog/21939 I don’t know if it is really needed, but thought it was fine? The gauge with the round side of the gauge head facing a curved or circular shape, in this way it can follow any shape. Like this. The cutting gauge with the flat side of the gauge head against a st...
Mike & Mads cutting gauge (blog)A gift to a wonderful friend. This is the second part, so for you who step in here, please go back to the beginning: http://lumberjocks.com/mafe/blog/21939 So off we go – part to!Are you ready Mike? Here is the updated sketch book drawing, so you remember where we were, and where we are going (it’s not always possible for me to do just that). Figuring out where the rod for the knurled bolt shall be.I choose a little up front, since...
Mike & Mads cutting gauge (blog)A gift to a wonderful friend. Before I start the blog I want to share with you why this blog ever came to life and the gauges were made. The truth is I did not need another gauge, I have several, and I just recently finished a panel gauge also. Here on LJ I have meet many wonderful persons, and some I consider personal friends even I never had the joy of meeting them life. Each person for his or her qualities, and for a consistent dialog. One of...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries