Ok, when I last left you this cutting board was just a Sketchup design. After a trip to the hard wood dealer and some basic milling I arrived at this very hefty glue up. I tried to do the ripping on my BOSCH, but even with a thin kerf blade it was a little too much for that saw, so I took over my buddies cabinet shop! Here are some shots of the first glue up..Here is the blank, out of the clamps and sanded to 1 1/2” thick..Ok, now the fun part..After squaring one end up on the radial ar...
I saw this FWW Complete Illustrator Guide to Woodworking, and while I found most of the book to be mediocre (although a nice reference book when you’re starting woodworking) I did pick up a couple of cool ideas from it… then again, it might have been from a different book…lol so I finally mounted my (until now just laying there) hand planes in the cabinet. The shelves are shaped to the profile of each handplane for full support, the shelf has a small ‘step’ (1...
I bought a No. 45, but the cutters did not come with the boxes that were included at the original purchase, all those decades ago. Not wanting to spend a large amount of money for real boxes, I’ve opted to make my own reproductions. However, I wanted them to be as close to the original versions as possible. The astute reader will note that the No. 45 cutter boxes had graphics on them displaying the contents of each box. These tend to get destroyed over time and are very rare to be...
I designed a log clamp to hold logs that are too big for the lathe. My friend, Mitchel Dillman over at Colorado Rock*N Logs fabricated it for me. See how to use it to carve a tenon in this video! Please visit my website and FaceBook Page. Thanks!
Hey rustic makers. I piddle around with natural sticks once in awhile, but have never spent the money to invest much in the tools that would speed up this work. I have agreed to help pro-bono with the Vacation Bible School set work at our church for this upcoming June, the week of the 10th. So, time is getting short. This sketch is my vision of what I am to do. I will be making the rustic fencing and gate for the kids, and a frame for the backdrop painting. I have located the logs, ...
After having to cut all the tenons by hand on my shaving horse i decided I never want to do that again and when i got paid for a quick welding job I picked these up for $65 including shipping. As far as the age and manufacturer of these tools i have no clue all I can tell is they are most likely cast iron. Here are some photos of them after I spent a couple hours cleaning them up and getting all the stubborn screws free again: I’m half tempted to replace the machine screws ...
This is a short blog, I hope, to show some work I was able to get built this week in the shop for a commissioned project. - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - - This tool is a Rounding Jack used to trim the brims of hats, and will be used by a discerning hat maker. In this exciting development, I have comp...
Update 2-19-2009: For photos of the restored Maillard Conformateur & Formillon For photos showing another restored Maillard Formillon here And photos of a Carrying Case for the Maillard Allie Conformateur and Formillon - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - ——sorry photos aren’t loading, I’m working on repairing this...
I have wanted one of these for quite a while and last week the gods of eBay smiled upon me. The beader is essentially a mass produced scratch stock that puts profiles on wood. Stanley made them from 1886 to 1941. Because this one is jappaned, it was made before 1898. Handplane Central has some information here. When shopping for them you want to look for one that preferably has its fence and set of 9 cutters. You can also make your own cutters with custom profiles. Both Lee Valle...
After some success with pens and a few bottle stoppers, I decided a bowl was overdue. I picked up a couple 2×6 rounds last week of curly maple and decided to see what kind of bowl I could fashion from one. I located center and attached the faceplate with some screws. My intention was to cut the bottom of the bowl for the Nova Chuck and shape it as much I could before turning it around and hollowing out the inside. I made the recess and shape the outside curve then sanded it to 600 grit. ...
- My Journey As A Scroll Saw Pattern Designer - 1196 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1218 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries