Several years ago I saw this ribbon design at segmenting.biz/inlayexample. I started by selecting the body of the design. In this case, padauk, yellow heart, aand hickory for three boards. Then I laminated the “ribbons” Then I cut 2” holes in the boards that make up the body of the design. The problem for a flat boarder(cutting board) was how to create the plugs without a center hole. The first idea was wood turning but this would require a massive square of exotic wood...
At this point in my creation of a luxurious gun rack, I have accomplished great work. I completed my planning and have cut down and planed the side pieces of my gun rack to the correct measurements. I then used carbon paper to trace my outline onto my cut wood. This is where I am currently at. I have had no problems so far, and hope to be cutting and shaping these two side pieces by next week.
I’m just making this marquetry to guild casket. It’s motive from Jean-Baptiste-Charles Claudot’s painting. I’m using burning to crate shadows. Finished
What do you do with a big chunk of log? What can’t you do? If the video doesn’t appear, CLICK HERE
I’m going to do a half lap with a cross cut, chisel paring, and followed through with a shoulder plane. Now if you didn’t know better, you might be thinking I’m an Olympic diver getting ready to execute a stunning high dive. But alas, I am not. I’m a woodworker, and this is a structural joint and the tools I will use to make a simple, yet strong woodworking joint. The Half Lap is a joint used to connect two intersecting pieces of wood. Each piece of wood is sawn to half its thickness. Whe...
this year we ended our holidays early for a prosperous ipe hardwood logs to be cut: frsh ipe logs waiting to be cut ipe log waiting to be converted into ipe hardwood decking boards wishing you from the Bolivian jungle a very prosperous and woodsy year!
I had a Ryobi 14 Amp 10 in. Compound Mitre Saw. It was working fine but could only cut a max of 5 inches wide boards. I was in the market for a new on but all of the sliding miter saw was so costly. I even considered a Harbor Freight one, but even at that it was a $100 and more for one. I decided to check out craigslist.com and found a Kobalt one there for s feel. Well, after I got home I found out why it was so cheap – it was not square. I tried a couple of time to square it up but it...
It’s snowing here so Its out of the unheated shop and staying indoors – good time to make the blade clips. I chose to use stainless steel because I waned a material that won’t rust, be strong and capable of sustaining the blade tension, and I like the color (not a big fan of brass although I do like it as an accent in some cases). I ordered some 1/2” stainless steel rods from Speedymetals a while back for no real reason when I ordered some other material as it was o...
If you carve, cut, sand, or even trim your finger nails (does that include everyone?) then you have got to check out this little rotary tool. This weeks review is on the Dremel 3000.
This project is building a childs rocking chair. Marc at thewoodwhisperer.com is organizing this and this is a charity fund raising project towards woodworkers with cancer. For more info please visit http://thewoodwhisperer.com/wfc/ and join in on the project. it is a nice and fun project to work on, can involve working with the kids in various steps, and is god a good cause both in terms of the charity and in terms of the rocking horse for the kids! For a while there I really wanted to jo...
- My Journey As A Scroll Saw Pattern Designer - 1428 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 92 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1452 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 230 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 192 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 179 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries