524 days ago
by Lee A. Jesberger |
28 comments »
Hi all;
I always mention my buddy Bruce, and here’s a post dedicated to him, (even though he’s still alive) knock on wood.
He has no experience in wood carving, other to set a hinge or something.
When we were building the Philadelphia Pie Crust Table, he would work on parts like turning the post, laying out the pattern for the top, as well as cutting it out and hollowing the middle of it with a router. The 1 inch thick board becomes about 5/8 inch in the middle are...
Read this entry »
534 days ago
by Lee A. Jesberger |
17 comments »
Making better use of you time includes making jigs that can be used in different ways, or positions.
The first series of photos show the jig used to cut the dovetail slot into the post, to receive the legs. This had a knob to tighten to prevent the post from spinning.
The second set of photos were the jig for carving the post. This too, proved to be very helpful. It has boards on the back side that fit snugly over my bench top, while held tight in the vise.
On the e...
Read this entry »
