To download a measured drawing or to see the full photo gallery, click here:http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx Project Description: I just completed a two part video series on how I made my new table saw sled. I’ve named the new sled the “Super Sled”. The Super Sled combines two of my best shop jigs! I love my original crosscut sled, so when the voters at Eagle Lake asked me to make a video about how to make that s...
I think i’ve figured it out. The perfect project would be some sort of crosscut sled exquisitely photographed atop a four ton custom workbench and titled “Female Form Plays Seductive Roll in New Sled Design”. Now Y’all know i’m right. Just PM me for my address as i expect a consultation fee from each of you.
My wife’s grandson is somehow about to turn two. Time to turn him on to tools, huh? That’s the primary reason I’ve been taking a whack at dovetail joints. The tool box is in dry fit, right now. In the next day or two, I’ll move to glue-up. The cuts in the ends of the handle are for wedge/shims to hold the handle in place. The pics: ....Current plan is to fill it with something like this….. I did something wrong with the plywood bottom. The ...
After reading a few articles and watching a few videos that had one, I decided to build a crosscut sled for my table saw. I looked at a bunch of designs but eventually came up with my own. Here’s what I built: I used ¾” birch ply for the base, doug fir for the front and back rails, and red oak for the sled runners. I found a 2×8x20’ at the local hardware place that had some very nice tight grain. Most construction lumber has really wide growth rings but this one board, out o...
Well here is my latest sled design. This sled is a combination of many sleds that i have seen in the past. One sled that really influenced it, is the super sled by john nixon at eagle lake woodworking. I like the t track on the sled part (the sheet part) but i am going to use real t track. I also liked the t track on top of the fence, which i incorporated, but it stops there. This sled should be able to do just about everything. You can cut 45’s ( blade tilting at 45 deg ) and every o...
With the new saw I have needed to make a new crosscut sled. I have been struggling with cutting large plywood panels so I also decided to make a panel cutting sled based on Norm's design Panel Sled I started by planing some white oak to fit in the miter slots. The runners are set just below the table surface. I attached the runner to a 3 foot run of plywood…. .... and ran the ply through the saw. I attached a fence to the back of the sled square to the cut edge. It...
Drawer Parts Galore I started by squaring some panels to the width of the drawers. To save time I rabbeted the entire panel. Later I would rip them to create the sized drawer fronts. Testing the drawer front fit. You can see the drawer pieces in each cubby awaiting their fronts. The backs of the drawers are held by dadoes 1/2” in from the back of the drawer. I got to spend some quality time with the new crosscut sled.If you squint you can see that there is another 1/2”...
I finished the latest accessory for the Super Sled – the Tenon Jig. It’s pretty darn easy to build. Given the cost of commercial tenon jigs, you could easily make this one with the scrap plywood you have laying around. The Tenon Jig’s features include: - micro adjustment feature- built in scale- unique leveling system For PDF measured drawing of the Super Sled and the Tenon Jig, go to the project page and click on the “Browse This Projects Files” link towards the top:h...
I realized early on after receiving my table saw that I would need a crosscut sled. The miter gauge was just too wobbly to be sure I was getting 90 degree cuts. My daughter had this bookshelf in her room that we replaced with some other furniture. Instead of trashing it, I decided that I could at least use it for something and decided on a crosscut sled. It’s made of particle board or something so I know I’m sinning a little bit, but it’s free and it’s all I ...
Tired of dealing with a loose or binding Crosscut Sled? Consider upgrading to adjustable metal runners. There are many opinions about crosscut sled design. Just Google “crosscut sleds” and you will see it returns about 125,000 results. This post considers what is under your crosscut sled – the runners. In the video I review my experience with two different types of aluminum runners. What is your experience with crosscut sled runners? Do you prefer metal runners, or ...
- My Journey As A Scroll Saw Pattern Designer - 1482 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1506 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 240 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- shipwright - 203 entries
- Todd A. Clippinger - 197 entries
- stefang - 186 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 177 entries
- PurpLev - 163 entries