Today I made a small purchase of timber. when I received the bill I choked, 1m of 100×100 redwood at 12.20 GBP thats $19.6 USD 7.2m of 225mmx47mm pine floor joist at £6.17 per meter ($9.92 USD per meter) thats £44.42 GBP or $71.39 USDPro discount reduced this to £32.78 + VAT (Tax) £6.56, total of £39.34 GBP or $63.23 USD The redwood is ok, not the best or even real good, but ok.The pine joists are C16 which is about the lowest grade, full of knots and sap pockets Like every thin...
I’m sure there are those of you interested in how much this thing weighs and (more importantly) how much it cost to build. A quick volume estimate puts the total amount of wood at ~5 cubic feet. Considering an average specific gravity of about 0.60 (range for SYP is 0.54 – 0.65, and the hickory is more than that), the weight is: (5 cu. ft.)(62.4 lbs/cu. ft.)(0.60) = 187 lbs So, the wood alone is about 190 lbs. Factor in the weight of the vise hardware and the many metal...
The following table summarizes the project costs in different categories in U.S. Dollars (full-resolution image). I didn’t include sales taxes, shipping costs, or cost of the screws and other supplies. The cost of the basic bench is not too bad. Mobility (lateral, not just upward) has its costs. The Veritas products are definitely splurges. (But I had to have something to put on my Christmas list…)
I think I need help. It’s happening. I cannot stop researching planes and workbenches lately. I don’t have room for a bench, nor money for any planes, but they’re just so enticing! Lie-Nielsen has been the most attractive by far, but I find it staggering the number of planes available – 44 standards listed, with an additional 30 variants, not including left/right hand options for the few that have them (same price in each case). The bench plane model numbers (e.g. N...
This is the question that I run into all the time when I bid jobs. Today I picked up materials for a small job and I mulled over this question as I stood staring at the cargo in my truck. Three boards of cherry and one sheet of 1/4” mdf core cherry… $217. Well, at least I got the job. Peace, Love, & Woodworking
Some of you will have received a PM from me regards the cost of shipping the Torque Work Centre to the US. For those who may require this info and have not received it. Most people on the continental US will be able to have the machine [configured similar to mine .. 2 meter by 600mm table with 900 mm outfeed on the arm.. including copy. saw and drill optional attachments, shipping and insurance,], delivered to their door for between US$3900 and US$4100 depending on actual address.The ...
Well, one more bowl turned and one more blog entry to write. And believe me, this is a good time to write this. It’s 4 degrees outside and 34 degrees in the shop. This topic is coming to a close. There are only a couple left to do I can think of, unless you have questions. Hell, there must be a couple of questions in Turlock. This is a tough topic to tackle. Say that 5 times really quick. Your pricing structure is this entries topic. The first component of any price structure is the cost. ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries