Almost Done> As I was reading the previous posted blogs on the construction of the Summer 2007 LumberJocks Joinery, I noticed that I failed to complete the posting of the latch for the cabinet door. Not only had I failed to post it, I had failed to install it. I wanted to use something like a clothes pin. The little loop that catches the wire for hanging clothes. I had created my wire simulation out of wood. This was installed in the end of a shelf board. The space behind the Holl...
Please Consider Checking Out My Website: MonkWerks.org Lets make one thing clear: I was certainly not expecting to be writing this blog entry this week. I had a lovely little piece on some preliminary reports that showed the shavings (only garnered from boards planed with a #365 Stanley Jointer plane) from 3000 year old, spalted, birdseye, curly, Spanish, aromatic bubinga cured CANCER. I had to hit the delete key, however when two things happened: 1) The world’s supply of the wood...
This design is a takeoff of a night table design I did last year. The influence is the architecture of Bhutan. I graduated from the University of Texas at El Paso, one of only about three places in the world that share this type of architecture. Bhutanese temples are characterized by their inward sloping walls and graduated windows.Front View: I used a combination of the golden ratio and Hambidge Progression to come up with the dimensions. The bookcase is open on both sides and can be plac...
Rockler Woodworking and Hardware is holding a video contest. And you are invited to join in. Submit a video telling what inspires you to be a Woodworker for a chance to win some great prizes.Click here to enter! If you aren’t planning to enter the contest, you can help me out by voting for my entry. The top prize is one that would really help get my new shop geared up. To vote for my entry Click here! any and all supporting votes would be greatly appreciated. ...
One of my first ideas for this challenge was to make a “green” table – as in recycled, not painted. After weeks of pondering, and ultimately ignoring the problem of where to begin, and more importantly, what to use, I remembered that I had this door sitting in my shed. It may have been original to the house, but has been collecting dust for the past 5 or so years since we bought the house and replaced the exterior doors – this one had dog door cut out of it and was ...
here is my video for steves contest
I’ve been meaning to make my 8 year-old a workbench so he can ‘help’ me when I’m out in the shop, but kept putting it off. When I saw Baligh’s latest contest, I couldn’t think of an idea for a project, then it hit me: “I’ll make a workbench!”. So, here it goes. This is what I started with: 1- 8’ 2×8 piece of Douglas Fir, 6 board feet of 1×6 pine, 1-4×4x1/2 sheet of CDX plywood (not shown), 1-3’x1” ...
Oh yea! Time to kick off the summer with the 2nd Annual Whirligig Wars Woodworking Event. Spend that shop time preparing for battle and build a whirligig for the event. We have some great prizes this year from our Awesome Sponsors Laguna Tools Rockler Woodworking and HardwareWoodworkers Guild of AmericaMicro JigThe United Federation of Woodworkers Brought to you by A Simple Design of Ocala, Inc. & Woodworking for Mere Mortals You don’t want to miss this!! Here is a look ...
Show Time I was excited about the show/contest and woke up early (again). We jetted down to Cerritos Community College. Judging had begun at 8:00 in the morning, though we arrived at 11:00 for the barbecue, show tour, raffle, and prize announcements. The Welcome Wagon Each guest was provided one raffle ticket and a ballot ticket to vote for People's Choice award (Worth $1000) We anxiously walked towards our project. Yes! We learned they had been very liberal with the turn in ti...
Crazy Stuff Stumpy Thinks About #21: "The reason for the season"- It's almost time for the Stumpies!
All of us find ourselves in sticky situations once in a while. I remember the time I was hunched over that mysterious package somebody had left in a busy children’s store. I heard a child say “Mommy, why’s that box ticking…” I sprung into action, sweeping the little girl out of harm’s way. “Stand back everybody, I know what to do” As I rolled up my sleeves and the young mothers began to faint, I was finally able to get a good look at the danger ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries