I’ve been sort of stuck with this project once it was time to get to the drawers mostly because for lack of material. I wanted to keep all the drawers made of same material and not pick and choose from what I could find at hand, and the only material that I have at ~1/2” thickness range that would make a good fit is some QS oak boards mostly 3 1/2 foot long: I ran calculations and found that If I went with my desired drawer depth of 14” I will not have enough material...
I’m awaiting a benchtop milling machine which weighs about 500lbs, and with the expense of the machine + additional tooling that would probably follow (vises, cutters, tool holders, etc) I wanted to be able to minimize the expense on the stand. most stands are in the 150-400 range (including shipping and such), which would be better used for other things. I still have some extra 4×4 FIR from building my workbench, and figured I might as well just use that. My first concept was t...
I got some good suggestions in my last post about what to do with this block that I glued up from mostly reclaimed red oak pallet wood: One of the ideas I liked best was an end grain cutting board. I realized I had pics of each side of the block, so I made a block in SketchUp of the same dimensions, then slapped on textures from those pictures. It looked like this: Now I could cut that up by drawing lines at the locations where I wanted the cuts, then using the push/pull tool t...
This blog entry is to post a concept sketch for a custom walking cane for customer approval. If you are a new reader, and like custom walking canes, follow this link that will lead to other project postings of several of my finished walking canes and hiking sticks:Carved Walking Cane thanks for reading,Mark DeCouMy Website- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - ̵...
I’ve been planing to build a down-draft table for quite awhile. It’s probably as important as a dust collector for staying ahead of dust collection. Someone gave me a furnace blower that puts out a lot of air, and I’ve been planning and plotting. My big hangup has been that the filters will plug up fast and I’ll be cleaning them all the time. This weekend I cut up a bunch of MDF and was surprised to see quite a pile of MDF dust in my dust seperator. When the air an...
- My Journey As A Scroll Saw Pattern Designer - 1365 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 84 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1388 entries
- frank - 417 entries
- degoose - 392 entries
- dbhost - 389 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 228 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 190 entries
- Rustic - 185 entries
- Chris Davis - 183 entries
- shipwright - 180 entries
- BritBoxmaker - 166 entries
- PurpLev - 163 entries
- stefang - 157 entries