Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...
What Is Burl? I have discovered that this question is the most searched question for burls on the internet. Over 140,000 times world wide per month. So I read what Wikipedia’s definition is and found out that they are not clear and in some details are wrong in their definition. So I am going to attempt to clear the muddy waters. First of all Wikipedia says: “A burl (American English) or bur or burr (used in all non-US English speaking countries) is a tree growth in which the grain ha...
After posting a few of these neat little calls I thought some other folks might like to know how to make them. They are an easy project and another way to use some of that scrap wood. The easiest way to make a scratch box is to have a dedicated mortiser set up with a 1/2”cutter but since I don’t have one here is how I do it. If you do have one you can quickly see how to use it to accomplish what I am doing. I start with a 1 & 5/8”“x4” piece 1/2” t...
Along with Woodworking, I enjoy a new hobby, Screen Printing T-shirts. I started a New Foundation for woodworkers Across the globe to unite and connect. And I am starting to print T-shirts for the UFOWW and found a need for a screen printing press. So here is a look at that build Also I had a short follow up on some notes about the press and why im posting a day early..
Hello Lumberjocks - I’m renting a house that came with an old table saw in the basement – a Craftsman – made by King Seeley Corporation. I found a good description of it here: http://www.old-woodworking-tools.net/craftsman-king-seeley-model-no-10322160-8-table-saw.html and the manual here: http://vintagemachinery.org/pubs/detail.aspx?id=1159 Eventually I hope to buy a house and get a “real” table saw, but in the meantime, I thought I’d see wh...
After looking through some other blogs here on LJ and watching some Youtube videos I thought that the tumbling block cutting board was something that looked challenging, cool and something I wanted to try. I learned some good ideas from these other blogs and wanted to share some of my experiences having now made three of these, my setbacks and discoveries to better produce these tumbling block patterns. I purchased a Wixey digital angle gauge as it looked like you really needed to be accu...
Well, thanks to the comments and questions I have gotten I dug through my pics to find one I had on how to make a pot call. So for the folks that want a quick tutorial here we go. A pot call is basically a shallow dish containing two ledges inside. One is cut into the rim to hold the playing surface while the second is a ring left in the center raised to clear the bottom of the pot and still leave a space between the sound board that rests on it and the playing surface above it. One thi...
Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 106 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 419 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries