After looking through some other blogs here on LJ and watching some Youtube videos I thought that the tumbling block cutting board was something that looked challenging, cool and something I wanted to try. I learned some good ideas from these other blogs and wanted to share some of my experiences having now made three of these, my setbacks and discoveries to better produce these tumbling block patterns. I purchased a Wixey digital angle gauge as it looked like you really needed to be accu...
Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
I got a wild hair to upgrade the wood on my Lie Nielsen planes from the stock cherry to cocobolo. There’s always more than one way to get the job done, but I’ll share my way. There’s lots of good pics along the way to help. So here goes. Safety note: Most all of us are at least mildly allergic to rosewood and other exotics. Where a mask….or you’ll wish you had. Just drilling cocobolo makes my eyes and nose itch. The Handles: You’ll want some 1×...
The one Project Video I get asked the most to make is how to build a crosscut sled for the Tablesaw. Well there are a lot of videos out there on making a Cross cut sled, so this is my take on it. I hope you can take something from this video and use it in your shop
Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...
On the suggestion of a couple comments from juniorjock and dantheboxmaker, I decided to try my first blog…anywhere…ever. I don’t really know what I’m doing, so I hope this turns out. Thanks to all who made the kind comments to my posting of this project. These are some of the steps I went through to make the “Frame / Panel Keepsake Box” at http://lumberjocks.com/projects/7096. Frame/Panels:This box consists of five Frame/Panels (FP) – the top, and the four sides making the carcass....
Recently I had a need to build a new table saw base for my saw. Rather than just building a simple replacement base, I opted to build one with lots of storage potential. This new base measures 6 feet long by 2 feet wide, which gave me good reason to move over to the new shop building. I haven’t yet finished the new shop set up ( haven’t even started) but this build is a great start giving me lots of options for storage potential… This build is a 2 part project. So be sure to...
I ask a couple of my woodworking friends to help me talk to you about some common woodworking joinery. Woodworking joinery is the method of joining two pieces of wood together to create a more complex item. Woodworking Joinery is the one thing we as woodworkers need to know and this video talks about 4 common woodworking joints that you are most likely to use in your projects. In this video you will learn about the following joints Half Lap Joints – Presented by Jay Bates Jays...
Hey everyone, Just wanted to share a couple of shop Jigs with you. One is a quick and simple jig for quartering your sheets of sandpaper to use in your palm sanders or sanding blocks. The second jig is a multi function tapering Jig that lets you do 4 sided tapers as well as straight edging rough sawn boards and cutting angles also.. There could be many more uses, there are just the 3 I focus on in the videos. Part 1 Part 2 Part 3
- My Journey As A Creative Designer - Woodworking and Beyond - 1770 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Toy costruction - 95 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1795 entries
- dbhost - 430 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- Betsy - 228 entries
- robscastle - 227 entries
- stefang - 221 entries
- Dave Rutan - 219 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 199 entries
- Smitty_Cabinetshop - 195 entries