This week’s Project is a horizontal Murphy Bed. The bed I built is a twin size bed using the Create-A-Bed Hardware kit from Rockler Woodworking and Supply. The finished look of the bed can be trimmed and finished to match your homes decor, really the limit on the final look is only limited by your imagination. These videos just tell you about the use of the hardware kit and the general construction of the project. I hope you enjoy it.
It’s that time of year once again. The 2nd Annual Whirligig Wars event is approaching! Woodworkers around the globe are beginning to construct their whimsical whirligigs with the hope of winning one of the great prizes this year. Whirligig Wars came to life last year when woodworkers across the globe battled it out and waged a war in wood. Due to it’s success Whirligig Wars has gained recognition from woodworkers and woodworking enthusiasts across the globe. In the Summer...
:O) I am a bit excited. I finally have a set of GRR-Rippers in the shop. I have been wanting one for a long time. So I put together this video to show you just a couple reasons why I am pumped up about these helpful shop accessories. Not only are they keeping me safe, but they are allowing me the opportunity to perform tasks I couldn’t perform before… That in itself has got me doing backflips… lol Here is a look at the video
When a viewer sent me a comment asking if I could make a First Aid Cabinet for the workshop, I thought to myself. “Yea what a perfect project to do”, because I am setting up the new shop, and it was the one thing missing. The First aid Cabinet was made almost entirely out of Pallet Wood. Oh yea! my first Pallet Project! http://www.asimpledesignofocala.com – Websitehttp://www.ufoww.com – The United Federation of Woodworkers Member Sitehttp://www.twitter...
The one Project Video I get asked the most to make is how to build a crosscut sled for the Tablesaw. Well there are a lot of videos out there on making a Cross cut sled, so this is my take on it. I hope you can take something from this video and use it in your shop
Well I finally finished the Tablesaw Base, trying to film during rain storms is almost impossible with the ambient noise from the rain hitting the metal roof.. but I waited it out, and am very happy with the outcome.. Here is a look at the final steps of building this base
Recently I had a need to build a new table saw base for my saw. Rather than just building a simple replacement base, I opted to build one with lots of storage potential. This new base measures 6 feet long by 2 feet wide, which gave me good reason to move over to the new shop building. I haven’t yet finished the new shop set up ( haven’t even started) but this build is a great start giving me lots of options for storage potential… This build is a 2 part project. So be sure to...
In this video I show you how to make a simple yet elegant lift lid box. These little boxes can be made with with different woods to give them their own character, and due to the simplicity they can be made in batches.. They make a great gift to give someone. The boxes in the videos are made from Spalted Pecan, White Oak, & Mahogany. Each Box was finished with 2 coats of Danish Oil to bring out the natural beauty and color of the woods. Also in the video I talk about an upcoming project...
Well this week was a busy week and I didn’t get to make a video project for this past Wednesday. So I thought I would Share this quick project video with you today. For a recent project I needed to make a larger version of an angle gauge to allow me to get the exact angle of an inside corner of a corner shower. After borrowing one from a fellow woodworker, I decided I needed one for the shop. Here is a look at making the simple but very useful over sized angle finder. These are commonly...
One of my favorite pass times is playing pool (Billiards) and I thought this would be a cool project to share with you. If you have a pool table in your house or man cave or if you know someone who owns a pool table this would be a great gift to give… Also be sure to check out and subscribe to my new Youtube Channel “The Rundown” to get follow ups on my main project videos, that are on my main channel, as well as the rundown on small easy to build projects, ...
- My Journey As A Scroll Saw Pattern Designer - 1558 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1583 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 275 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries