I got a lathe in June 2015. It’s a Rikon mini lathe. For more on it, watch this video. Anyway, It sat unused until October 2015 when I was finally able to purchase some tools. To learn how to turn, I am starting with pens. I got everything I needed to make pens and have made 2 on this lathe. The first two pens I made were at a friend’s shop. He invited me to check out his shop and showed me how to turn pens. I knew then that I needed a lathe because it was just fun to turn out ...
Part of every workshop success is being organized and having templates on hand to trace and cut out, my shop is no different, for the longest time I kept my templates stuffed in a box, as of lately I have been getting request for shelves, rather than dig out these templates I created the “I SEE IT BOARD” this way a person can see the options that are available, it will be easier for me as well because I will be able to grab what I need and when I am done I can easily put it back ...
https://youtu.be/Gwalim1cQJc In this video I talk about my new tools nail gun lathe chuck and a few more bits and also my future table saw build.More videos coming soon ! My stickers Free HERE http://goo.gl/zfdVi5
This Thorsen House cabinet repro is probably the third large-scale Greene & Greene project I’ve worked on in addition to numerous smaller lighting items. Common to the lot of them are masses of Ebony splines and plugs. Lots of information exists on people’s own ideas of how to pillow, round, shape, soften and relieve simple square plugs. Probably the most common that I’ve come across is William Ng’s tactic of chucking up a squared and thicknessed stick and pillo...
Common name(s): Cocobolo, Cocobola, Caviuna, Cocobolo Prieto, Funeram, Granadillo, Jacarandáholz, Nambar, ñamba, Nicaraguan Rosewood, Palisander, Palissandro, Palo Negro, Pau Preto, Rosewood, Urauna Botanical name: Dalbergia retusa Synonymous: Distribution: Central America Description: Cocobolo is a colourful wood seen in many different colours, from bright orange to dark purple, almost blue. It has a very fine texture and thin darker line show the late wood. Big pores with...
I got a wild hair to upgrade the wood on my Lie Nielsen planes from the stock cherry to cocobolo. There’s always more than one way to get the job done, but I’ll share my way. There’s lots of good pics along the way to help. So here goes. Safety note: Most all of us are at least mildly allergic to rosewood and other exotics. Where a mask….or you’ll wish you had. Just drilling cocobolo makes my eyes and nose itch. The Handles: You’ll want some 1×...
I am making some wooden handles for some harbor freight 6 function screw drivers for Christmas gifts. I made the first one from Walnut and the second one from Cocobolo. Yes I understand that cocobolo is a little nice for $2 hardware but I had this wood around for a long time and it sure does make a great handle! Please check out the video and comment I love the interaction ! Thanks!! Chris How to Make Wooden Handles for Screwdriver
This is my entry into the Christmas Ornament Challenge put on by Alan Stratton and Carl Jacobson. This is the third annual challenge and I ma amazed at the beautiful ornaments folks have made! This idea came to me as I have made toys quit a bit in the past and I thought just make a version of an airplane that is smaller. Proportions were determined mostly on the fly and are just approximations of what should look good. Much of what I did I had in my head and I made the first piece then fit ...
well I searched my garage for material appropriate to make handles/ends for my new steam bending strap. (re: Lee Valley)I was looking for a piece of 2×2 that was dark and possibly luan that I remember having. couldn’t find. then I looked through all of the stuff that I did have handy… beech, could be chair parts, osage, don’t want to waste it on something that’ll be left outside….spf .. to soft, oak (red or white) chair parts again. then I bumped into these....
I met a local videographer and had a blast shooting this video! It’s more of a general overview of me and how I got started doing what I do. A step by step tutorial it’s not, but I’m extremely happy with how it came out and I think it’s just really cool to see myself working in the third person! Hopefully you all enjoy this too! Thanks, here’s the link! http://vimeo.com/98821147
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries