hello all.. Now, having got the parts of the basic structure ready I wanted to get this glued up solid before fitting the parts that form the drawer pocket so I needed to get the legs shaped. Apart from the use of the Cocobolo panels the legs were the only other part I was fairly certain of once I knew this would be a table. I had seen some legs I liked and which seemed like they would fit here. I had a photo of the piece that sported those legs and imported it into sketchup. I used th...
Hello all (echo,o,o,o) several hundred “reads”, no comments, so either you’re all riveted to your seats awaiting the next installment, or that’s several hundred open page, scroll down a bit, go read something more interesting. Not wanting to leave this half way through I shall proceed with the upper aron frames and front rail joinery. The apron panels were to be framed with pieces of leopardwood. Here you can see the top pieces which are grooved to fit onto a rabbe...
Hello all, just in case anyone is following along I’ll continue here with how I added the gunstock joints to the legs as an afterthought.I had already prepped the leg blanks and cut mortises when I decided (influenced in large part by a nice arts and crafts hall table in a magazine article) that the table would benefit from”flowing” the legs into the apron frames with gunstock joints. This will probably be easier to visualise if I show you the end result, so this is what ...
I’m in the market now for a dust collector. Being married with 2 kids there really isn’t a lot of money I can budget for this at this time. I’ve read the reviews on the Harbor Freight dust collector but I’m wondering If I could get some woodworkers perspective that have this unit. How is it? Does it work well? And is it ok to run pvc or gutter sewerage pipe instead of the metal stove type of piping???? Any info on this topic from all LJ’s would be great.
Hello all, things have been deathly quiet on the first installment of this blog, which I started due to interest on the project I posted here. Having started, I should go on, so in this post I’ll show how the remaining veneered panels for the table aprons and the legs came together. Here is the substrate for one of the small side apron panels being planed up, with the thick re-sawn veneer that would be stuck to it. The substrate is a piece of Primavera and I did not back it with a ...
Hello all, I had a couple of peeps interested in seeing the process shots of the Cocobolo and Leopardwood table with drawer that I posted, so I thought I’ll blog it here split into a few parts so nobody has to scroll through it all in one go… You can see the finished project here. I don’t have a shot of the small Cocobolo board I was given that inspired this table before I started cutting it up but it was a couple of board feet. There was a lovely rich heartwood section d...
I have a General 50-200r model table saw. Lowering the blade is a chore becuase it feels like its binding. I’ve squirt some liquid wrench & WD40 on the worm drive screws & worked it up & down. It’s gotten better but there is still an issue. Wondering if anyone else is having this issue & what’s a good lubricant to use on these gears as well? Also what would be a good cleaner to clean the gears with as well? Thanks all.
I got a lathe in June 2015. It’s a Rikon mini lathe. For more on it, watch this video. Anyway, It sat unused until October 2015 when I was finally able to purchase some tools. To learn how to turn, I am starting with pens. I got everything I needed to make pens and have made 2 on this lathe. The first two pens I made were at a friend’s shop. He invited me to check out his shop and showed me how to turn pens. I knew then that I needed a lathe because it was just fun to turn out ...
Part of every workshop success is being organized and having templates on hand to trace and cut out, my shop is no different, for the longest time I kept my templates stuffed in a box, as of lately I have been getting request for shelves, rather than dig out these templates I created the “I SEE IT BOARD” this way a person can see the options that are available, it will be easier for me as well because I will be able to grab what I need and when I am done I can easily put it back ...
https://youtu.be/Gwalim1cQJc In this video I talk about my new tools nail gun lathe chuck and a few more bits and also my future table saw build.More videos coming soon ! My stickers Free HERE http://goo.gl/zfdVi5
- My Journey As A Scroll Saw Pattern Designer - 1694 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 92 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1719 entries
- frank - 417 entries
- dbhost - 403 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 286 entries
- William - 258 entries
- shipwright - 231 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 203 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 191 entries
- Dave Rutan - 191 entries
- Rustic - 190 entries