LumberJocks

Woodworking blog entries tagged with 'coat locker'

  • Advertise with us
View coloradoclimber's profile

coat locker #2: final design

10-13-2008 08:43 AM by coloradoclimber | 3 comments »

The box is made out of 1/2 inch plywood throughout with 1/4 by 3/4 hardwood edging. The similar colored pieces are either identical or mirrors. All of the joinery is either dados for the box or half lap for the edging. The edging is 1/4 inch thick hardwood edging instead of veneer edge banding. The hardwood will stand up to much more abuse as shoes are thrown in on a daily basis and it will give a small bit of stiffness to the 1/2 inch ply of the box. I liked the rounded ...

Read this entry »


View coloradoclimber's profile

coat locker #1: inital design

10-11-2008 08:28 AM by coloradoclimber | 0 comments »

I need a coat locker near the front the door for the kids to throw their shoes, coats, and back packs in when they get home from school. Right now they just pile it all up in a big pile behind the door. Here are some initial concepts. Not finished but close. I’m not sure if I want to put some blocking in between the dividers or just go with biscuits or dowels through the shelves and into the dividers. The locker is around 66 inches high, 12 inches deep, and almost 40 inches wid...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com