I thought some of you LJ would like this video that I found on youtube: (Note: Not my video)
After a few months of saving money, I finally got all the electronics for my CNC! I purchased all the electronics from: http://buildyourcnc.com/electronicscombo.aspxwhich include:(3) 425 oz-in stepping motors(3) Drivers (3.0Amp 24-40 Volts, 1-1/64 microstepping)(1) 36v 8.8a Power Supply (1) Breakout board Then I built a box out of poplar and Plexiglas to house all the electronics: Then I tried out the monitor shelf that I came up with in the last b...
Well I just turned 17 years old today, February 23, 2011, and I have always wanted to make a CNC router. So for my birthday, I asked my dad to get me a CNC hardware and plans kit from www.buildyourcnc.com. Then I went to Lowes and the Home Depot to get a sheet of MDF, aluminum angles, threaded rods, and various other items I needed to make the machine. So the whole weekend last week, I’ve been working on cutting all the parts I need and then drilling all the holes in the pieces. Here is...
About a year ago I started looking into buying a table saw and decided to get a 3hp sawstop. After looking around I saw I could build a CNC machine for around the same money. I decided to go with the cnc machine to join my computer and building things hobbies. Here is the CNC router table that I built. It has a 48×48 inch cutting area with a 3hp (2.2kw) spindle.It is built from parts from cncrouterparts and 8020 extruded aluminum. It ran me around $3500 to get running. Parts Li...
Once more Keith has come up with a winning machine… first the RouterMaster, then the SlabMaster and a few years ago, the Torque WorkCentre… many of you know I bought one and love it…... Now the machine we have all been waiting for… the CNC Router…Making its debut at the Maleny Wood Expo last weekend… Keith has been making industrial CNC machines for many years and is his passion…this is his first foray into the smaller more affordable machine...
Well today I didn’t have school due to a snow day, so I figured I would work on my CNC some more. I knew that I needed a stand to put the CNC on and to make it sturdier, so I was off to Google SketchUp! I wanted to make the CNC about counter height, so I made the stand 34 1/2” high plus the 1 1/2” table of the CNC makes it 36” high overall. Here is the simple design that I came up with using 2×4s for the stand: So I was off to making saw dust!First, I cut f...
Never thought I would actually get one… but I have put the deposit down on a small CNC router… built in Redcliffe, Queensland.. about 30 minutes drive from my workshop… Made by Vermec.Work surface is 1000mm by 800mm and runs a 3HP spindle…All components are either Australian or American made… with many of the parts machined in their own workshop. This is not my machine but I did get to play with it during testing prior to it being shipped north to a secondary ...
I have not had much time or money to work on my CNC lately, but I did make some progress. Here are some of the things I added to it so far: I added two shelves for the computer and electronics to go on: I also bought 4 cheap casters from Harbor Freight and installed them: Also, on an unrelated note, my dog loves the new shelf and sleeps on it all the time: Now for some ideas: I need some where to mount a computer screen to use for the CNC and I have a few ideas, but...
Now that I have all my power supplies drivers and controllers, all those electronics need a nice safe playground to hang out in away from the dusty environs that the machine will no doubt foster. At first I didn’t think I could get a box this nice. These water-tight Nema enclosures are big bucks!But, I found a guy on eBay with a reasonable asking price, ( his wife must’ve wanted to park her car in their garage again ), and I made an offer, sobbed out my poor man’s DIY cnc...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries