Since I can’t afford a bunch of quarter sawn white oak to finish the dining table right now, I thought I’d look for a project that requires less materials. Having just read “Longitude” by Dava Sobel, I’ve been fascinated by wooden clocks. Being a Mechanical Engineer, I also have an affinity for anything with gears. I found woodgears.ca few years ago and have been fascinated by the stuff he makes. I’ve also looked into building some kind of kinetic sculp...
The following are gateways to project/blog/forum postings re: the identified topic(more coming soon) LumberJocks’ Projects/Skills Gateways Bandsaw Boxes Benches Birdhouses Bookshelves Bowls Candle Holders Canes Clocks Coffee Tables Cradles Decks Doors Entertainment Centres Frames Guitars Hinges Jigs Kids' Projects Pen-Making Planes Sanding/Sand Paper Scrollsaws Toys All LumberJocks’ GATEWAYS Safety Tips ...
Hello again! First off let me apologize for the absence of posts lately. I have had a severe case of Lifus Interuptus and with one thing leading to a BaZillion others I have been unable to sit down and put thoughts to screen, even now my Newfoundland is trying to see how much drool can fit in a keyboard. So sorry and hopefully the posts will be a little more regular for a while. Sssoooo… let us begin with the fun part of this project. Cutting the gears out. I am splitting th...
In the last post I mentioned I had decided to make my own plywood. I initially had two reasons; one was that I had a fairly large pile of Red Oak and Ash in my shop, and the second was that the thicknesses called for in the article, mostly 3/8” plywood, was not readily available locally. So I started by making a couple of test pieces. To see how easy the process was and if I was going to have enough time to complete all six clocks. First I cut a board to about 3’ in length...
There are a number or holes required for this project. Here’s a list of purpose and sizes. Galileo = 1 1/2”, Dowels = 5/16”, Magnets = 10mm, Clock/Instruments = 2 3/8”, back air holes 3/4” to 1”. Here’s how I usually set the depth of cut. Instead of measuring from the top I set the drill to stop a distance from the bottom. To locate a centerline I usually rip a piece of scrap and butt the part up against a stop so both are flush to the ed...
Well, as a shop student there are many projects that are new to me. I recently made my very first nightstand, I turned my very first pen about a month ago (and about 10 since), finishing up my first picture frame as well. My next project is going to try and build a unique clock. So, maybe the LJ crew can help me out. I am starting with a 3 1/2 inch diameter clock insert. Kind of simple, but still for my first one it should work. I am hoping to make it around a foot tall and maybe around 8R...
- My Journey As A Scroll Saw Pattern Designer - 1525 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1550 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 211 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 187 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 166 entries