The following are gateways to project/blog/forum postings re: the identified topic(more coming soon) LumberJocks’ Projects/Skills Gateways Bandsaw Boxes Benches Birdhouses Bookshelves Bowls Candle Holders Canes Clocks Coffee Tables Cradles Decks Doors Entertainment Centres Frames Guitars Hinges Jigs Kids' Projects Pen-Making Planes Sanding/Sand Paper Scrollsaws Toys All LumberJocks’ GATEWAYS Safety Tips ...
We were contacted by a client to restore his Boulle cartel clock. Boulle is no fun to restore, it is time consuming and quite a special. For budget reasons we are restoring his piece by stages. The clock is composed of 3 parts and each of them will be restored in 3 sessions. We will start with the top We remove the bronzes The unglued brass pieces are lifted and rubbing is made for the missing brass elements The cavities are full of oxidized glue that nee...
It has been a while since I posted anything as a friend reminded me couple days ago. So I thought I would do an update on couple projects I have been working on. On an earlier post I had shown the start of a restoration on a Boulle clock. We had restored the top part, since I have been working on the 2 lower elements. I did not took a lot of picture of the restoration of the middle section But I documented better the restoration of the lower section that was partic...
July 14, 2008 Last month I purchased a double-sided clock (which happens to match the one I had purchased earlier this year for my living room.) My intention was for it to hang outside so I could see it from almost anywhere in my yard. With our LumberJocks’ picnic being this past weekend I wanted to have the clock put up, if only temporarily. And so we selected its hanging place, attached the bracket to the deck post and hung the clock. The problem is that the clock is not...
Moving further down the road to starting a professional shop, I’ve designed my own logo, seen here: I’ve had a stamp made up of it, so I can “sign” my projects. I think it will look professional. I did want to use Maker's Marks, but this guy is impossible to get a hold of; I’m guessing he is incredibly busy. Anyhow, I think it came out well. I’ve also done more planning on what to make and sell. I have a small shop, so making huge furniture is ...
On #3 of this series I flattened out a slice from a Birch stump. I went on & completed the job today. I also added it to My Projects.The size is about 25” x 20’ x 2 1/2” , & it weighs about 20 pounds. I made the motor cavity larger to lighten it up a little. _The other day I routed out the backside for the clock motor. I checked out the motor installation. Carved some numbers on the face. I carved a Maple leaf for the pendulum weight. I hung the clock...
I have always had a fascination with how things work. As a kid I drove my parents’ crazy taking things apart but it was part of learning. Even today I will look at something a wonder how it was made or how it works. For most things I believe that if someone else can do it then so can I, now I am not saying that I am smarter than anyone else, I believe for the most part that all of us can figure most things out if we try. Around a year ago I was looking at a pendulum clock, I have always...
I don’t know what time it is!!! If only I had a clock!But not just any clock. A four foot long digital clock made out of antique mahogany wood. Guess it is time to make some sawdust! I bought a board of reclaimed mahogany from woodcraft: Then I created a pattern for the led segments: I used a scroll saw to cut the segments out of the wood, and a plunge router to hollow out the back side of the wood: Add some wood varnish to the top side: I used little pieces of brass supe...
Remember yesterday, I was thinking about getting rid of that big old Stanley Pin Router. After looking at what it can be used for, I’ve changed my mind. I dug out this big chunk of Birch sawed from a stump. (A logger was kind enough to leave it there after cutting it.) In about 2 hours I flattened the thing out, pretty handy hey.For all the years I’ve had this machine, my only thought of for using this was pin routing. I’m now going to make fence setup, so I can drill mortis...
I figured it was time to start another new blog. We’ve got friends that are getting married, and we wanted to give them something special. I figure the best gift you can give is one you want for yourself, so I’m going to make two while I’m at it. We originally thought about a mirror, but realized shipping it would be problematic. Then I thought about the clock project that had been bouncing around in the back of my head. After my usual extensive research, this is the de...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries