On a Roll After organizing the sheet goods I moved on to the lumber rack. I did not get as much done as I would have liked because I had to go look at a job and I ended up making a couple of models for beam wraps and a light trough. I got the three small shelves that hold stock up to 48” cleared off. I only kept the stickers for lumber and some blocks that hold projects off the table for finishing. I discovered the T-tracks that I intended to install on my bench and chop...
I really like my local hardware store… Stoneway Hardware. First, the people who work there are VERY nice. One happened to go to school with my husband about 12 years ago. Another girl is super sweet. And the owner took a few minutes to personally visit with me when I mentioned at the checkout that they were going to be seeing a lot of my business in the future. I picked up a wide selection of regular ol’ sandpaper, honing oil, Howard Feed-N-Wax (Beeswax and Orange Oil), steel w...
I got my folding rule from Walt. Anyway, i should have taken a ‘before’ shot. I decided to clean it, and i ended up messing it up, i think. Is it beyond repair? I saw this entry from Chris Schwarz, but i can’t get any Borax here, or oxallic acid. So i am turning to you, my LJ buddies for help!
So this weekend we finally got the dust collector over in the final spot. I was anticipating perhaps working on my son’s gun rack, but he had other plans this weekend . . . but I knew I was going to need to do something about the dust collector hoses. When I moved the dust collector over the other night I noticed that the inlet side of the chip collector happened to fall right between the furnace ducts – the supply and returns. This gave me a great idea about running the 4 inch...
Ok—two success stories last night. I got rid of one cheesy (cheap) toolbox that I bought years ago for the princely sum of $40 . . . some happy owner has a new $10 toolbox for his grandson. The most important part is I have more floor space! As you can see in the recently updated Sketchup drawing . . .I need it! So the plan is to keep on selling/giving away/trashing what I don’t need. Thus far I’ve discovered that if you put it on Freecycle/Freebie type listings p...
Ok, so I have to know where I’m starting out from and what I have so I did a little inventory last night. Below is the items I have in the garage. Wow . . . that’s a lot of stuff. I’m thinking some items might just need a re-do to gain functionality. I have one item that is on spindly 2×2 legs, but I might be able to add some addition boards/bracing and put it on wheels for a rolling work table. My next course of action will be to plug all this into Sketchup and re...
Ok . . . this is just ugly I know. Part of the reason for that is it’s actually “in process” because I moved some stuff to get a work surface that I moved into the basement area. I have a 4 foot high table and a hutch type table area that I moved into the basement area for doing electronics and computer type work on. That freed up some area along the back wall, but left me with a lot of mess that was being stored on the table. Ugh. You can see the variety in stora...
Where did I lay that down at? Oh yea . . . there’s the pencil. No wait . . . I was looking for the drill chuck . . . it was . . . wait . . . is it here? No . . . hmm . . . oh look, there’s that thing I was looking for last week. Now what was I looking for again? Oh yea . . . wow . . . this would be great for something else I was doing . . . it would just take a minute to do. (Four hours later) Now what was I doing again? Yea . . . that’s my garage experience in ...
After ripping a bunch of somewhat “wet” Douglas Fir for my workbench, the blade on my table saw was pretty gummed up. It was time for a good cleaning. When I clean my saw blades I keep it simple and use Simple Green. It’s able to clean off most of what can get on a saw blade.I saturate both sides of the blade with Simple Green and let set for about 15 minutes. I then use an old toothbrush to scrub the residue off. I also use a glove, because the teeth are sharp and we want to work safe. ...
Well this is the second time I’ve wrote this I tried to slip in a picture and ended up losing my whole blog. Oh well, what else have I got to do, it ain’t the first time. To the blog: I’ve spent the better part of two days trying to track down all the parts to my blower/vac I’m talking 200 mph of sucking and blowing power ow, ow, ow, ow, more power (tim the tool man). I needed it because I’ve got about 6-8 inches of saw dust and chips from all the planing and j...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries