Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #1: Introduction - Sign Up and Objective
Hi, Everybody! My name is Sheila Landry, although many of you may know me as ‘Scrollgirl’. I’ve had that nickname for over fifteen years now and chose it because I LOVE SCROLL SAWING! I work as a contributing editor for Creative Woodworks and Crafts magazine and I also have my own pattern business called Sheila Landry Designs where I sell my original scroll saw and painting patterns. I was asked by MsDebbie if I would like to host an online scroll saw class here on...
A while back I was asked if I would be willing to destruct… uh, I mean, INSTRUCT a class on Spoon carving. Since I have been told on numerous occasions that I ‘have no class’, I am going to, instead, call this a spoon carving ‘collaboration’. A forum of sorts, where anyone that wishes to participate can ask and answer any question, offer or receive any advice and most of all, be a part of the creative process. Obviously, the goal will be to CARVE A WOODEN SPOON. Simple enough, right? ...
Hello, I will be offering an online class here on Lumberjocks. Please sign up in the comments area below. Over the next several weeks I will be showing a step by step process for creating a hollow form vessel on the lathe. You should have some basic wood turning skills and some basic tools before attempting this project. When in doubt, error on the side of safety. Suggested Tools1/2” or 5/8” bowl gouge with fingernail grind1/2” or 5/8” straight hollowing tool1/2&...
I know that this has been long awaited.. and I hope that the delay has not caused some to drop out of the class… NO.. I am sure that is not the case… one things that woodworkers have…is patience… Miss Debbie wrote in the latest copy of Lumberjocks e-Mag… “Patience is a virtue” they say, and a woodworker often has to use patience while working on a project. I’m picturing the time spent sanding an item, taking the sandpaper to finer and fine...
Hello all,I have been asked to give a class on making a wood bracelet similar to this one. http://lumberjocks.com/projects/18322 I want to point out that we will NOT be using the special jig I made. I have a different way to get the same results which does not require each of you making a jig. Part #1Getting started and choosing wood. Step #2Preparation off wood and cutting notches. Step #3Drilling holes and shaping. Step #4Finishing and final assembly We will begin be goin...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #2: Basic Supplies and (EGADS!) Homework!
Well, it looks like we are going to have a great group here! I am really happy with the enthusiasm of everyone who wants to participate, and also the cheerleaders. You can all get back in your seats now and we can start to get down to business. I wanted to get this post up here by the weekend so that if you need to get some supplies to start, you will have some time to do so. One thing that I really like about scroll sawing is that it takes very little ‘equipment’ to mak...
Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #7: Cutting Inside Corners and Angles
So far we have looked at how to prepare our wood, choose a blade, cast on and off a piece and cut outside curves and corners. Now it is time we do some inside cutting. Most people associate scroll sawing with cutting fretwork. At first many people don’t understand that in order to cut fretwork pieces, you need to drill entry holes in the ‘waste area’ (or the part of the pattern that drops away when you finish your cut) and thread the blade through that drilled hole ...
Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 216 entries
- stefang - 215 entries
- Stevinmarin - 212 entries
- Dave Rutan - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries