I recently completed this rack to hold my parallel bar clamps. I try and avoid creating mundane objects, even if they are just for the shop. In this case, the rack is constructed from Baltic birch, but I added some curves and decorative elements to give it an arts and crafts look. All the joinery is accomplished with my Domino (6mm and 10mm dominos), but at glue-up time I still had to deal with 28 joints at once – fun time, but fortunately successful. And here’s t...
Redoing my clamp rack to better accommodate my needs.
Being new to woodworking, shop projects are a large part of my efforts as new tools come into the shop and the shop becomes more of a shop than a garage. I am refurbishing one wall at a time, so please keep that in mind when an unfinished wall comes into view. This was an early project to get my clamps out of the way. It was just a simple box placed on said unfinished wall. please excuse the trailer park curtains. They have been replaced now with the mini blinds. :) This is t...
Just a short video on a space saving pipe clamp rack I came across. Links are annotated in the video on where to see the designers pictures. If you are like me, this is just the kind of rack to help with limited space and be functional and affordable.Thanks for watching. http://www.youtube.com/watch?v=mvFh2aANno8
Got a very late start to the day so ended up taking up most of my time with the Clamp Rack Sketch Up Design. Tomorrow I will brave the rain to go out to the lumber pile outside and see how many 1×6’s I have out there. The design is basically to hold everything I might need for assembly: Clamps of all sorts, Glue, Tape, fasteners. I designed for use with Fir 1×3 & Birch Plywood, however any 1×3 and 3/4” & 5/8” sheet stock will work. I will be using M...
What started out as a simple clamp rack project grew into an entire assembly center. I started out wanting a mobile rack for all of my clamps to make assembly easier and avoid the running back and forth for clamps and/or having the work table covered in clamps so there is no room to work. The next thing I knew the project grew into the idea of having everything needed for assembly on a mobile cart – clamps, glue, biscuit joiners and biscuits, dowels jigs and dowels, pocket jig pocke...
Like many of my fellow LJ’s my workshop is setup in half of my two car garage. My workshop has been setup over the last few years as I’ve acquired new tools, and taken on new projects. Because it grew gradually there was no overall design or plan behind the setup… it’s just kind of happened. I’m sure that sounds familiar to someone else out there… So after I completed a couple of Christmas projects, the whole time muttering under my breath (or occasio...
This my second installment of my shop build. Last week I made a lumber rack and to fill the other blank part of that wall, I have constructed the simplest style of clamp racks. They are modular and super simple to make. They accommodate pipe clamps and bar clamps. There is also a bracket to hold the hand clamps, c-clamps, and band clamp. Watch the link below for full details on how to make you own modular clamp racks that can be moved anywhere in the shop. Thank you for watching and Don&...
I wanted the shelves to be extremely strong and have a good size lip to keep stuff from falling off while I move the rack around. I typically over-engineer my projects, but with as much weight as this rack has on it I am very glad I built it solid. I glued and screwed (with pocket holes using my Kreg Jig) the A-Frames, but I decided to keep the shelves without glue so I could break down or change the rack. The long shelf sides are the rails that connect the A-Frames so I put 2 pocket hol...
I’m somewhat partial to having everything in drawers or cabinets, mostly just to keep it safe and keep the dust out of stuff, but some things just need to hang on the wall! First up is the mandatory clamp rack setup. I built all of it from scrap lumber which I have tons of! It’s convenient, yet somewhat protected since the shop door is usually open. Also have most of my longer measuring tools hung up. The smaller stuff is in a drawer in the toolbox. I also organiz...
- My Journey As A Scroll Saw Pattern Designer - 1614 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1639 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 181 entries