So my last package for the day just showed up. There should be a few more over the coming days but for now lets talk about my new circular saw. As I said in the last episode I need to retool my shop for making cabinets. Since I cannot fit a large table or panel saw in my shop I will have to cut my sheet goods with a circular saw. I am replacing a very old Black and Decker that looks like hell and cuts even worse. I believe I have more chance of cutting a perfect circle than a straight ...
Hey Everybody In this episode of the Teenage Woodworker I go over some basic cabinet construction in the first part of a three part series where i make a printer table. There are a lot of technical things that i go over but try to stay with me for the whole episode. As always since i am only using a digital camera to film the sound is a little bad. so try to bear with me it helps to turn up the sound and sit a little bit away from the computer. this improves the sound a little bit. ...
The cover of the roof with wood is finished. I made side rails on my own way. The view from underneath is satisfying for me.
Farm Table #1: Building my first table - and how it's not easy to angle cut 2x4s with a circular saw
So as a new member to LumberJocks I’d thought I’d start out my saying a few words about my current project. I’ve only been doing this for a couple of years now, have limited room to work in (essentially a corner workbench in our basement) and only have “the basics” as far as tools go, such as a circular saw, jigsaw, orbital sander and a couple of power drills.My last “big” project was a fairly simple patio table set with chairs & bench, which c...
Well, got the top almost flat on the “face side” the other day Used a scrub jack plane to get things down to almost flat, other than all them scalloped areas. Got out a little bit bigger, and wider jack plane. This time, it is used like a try plane, going at the diagonals to the grain, until all them scallops are gone. Top still wanted to bow up a bit, so I clamped that end down flat, and left it sit a while…. Well this evening, flipped the top over to work on t...
As a beginning woodworker without a large shop full of tools, I’m was at first skeptical about my ability to get by and produce interesting things without tools like a table saw or band saw. One of the things that’s really helped me get by is the cutting guide. I built a massive 8’ long cutting guide for my Ryobi circular saw, which makes it about 1000 times easier to chop up plywood without being dependent on the table saw I don’t have. I decided this evening tha...
So I’m getting geared up here and placed an order last week for a new Millwaukee circular saw with Diablo 40 tooth blade. I also ordered the EurekaZone rail system SGS-100. Had an issue with both orders. :-( The Diablo blade arrived missing a tooth. I have emailed Toolup.com on Saturday night (last night) and am awaiting a respose. The EurekaZone rail system arrived with a broken anti-splinter guard.I emailed them on Thursday regarding the issue and have yet to hear from them. ...
Well the sawboard is a pretty simple jig, but man is it invaluable! The other day I needed to rip long taper cuts on a 2×6 and it was just the tool. I have been thinking about incorporating some holding clamps to the base to make it quicker to set up and use. This is what I came up with as my first run at design. I am thinking this would be ideal for breaking down plywood. The overall length is longer than 8’ so the design is two ply to allow for overlap. One side has a piece of ...
i have an 84 by 16×39” Parsons Bench. It is in my second bedroom, up agains the only avalable wall in the room (it’s a gambrel house; my outer walls are slanted inward). The bench has become the despignated storage area for stuff from all the other rooms… stationary supplies form my office/computer area, tools, clothes, books, old computer monitors, junk, sewing supplies and torn clothing, etc. it’s overflowing. so, i drew up a set of plans for a set of sh...
I always enjoy reading project blogs here on LJ, so I’ve decided to attempt one myself. Hopefully some folks will find it enjoyable! I’ve built a few beds over the past years, the most recent being this one that my son uses: It’s solid maple and has been beat up a little over the years and acquired glow-in-the-dark stars, all of which adds to its character, and I don’t mind in the least. I like that the bed has been host to both my children and that they...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries